Каталог
Назад

Tek Know Ukraine

Solution for metrology

With us expertly :)

DPI705E Handheld manometer

- Pressure measuring range up to 1,400 bar

- Up to 0.025% Accuracy

- Leak test

- External temperature sensor (optional)

- External pressure sensor (optional)

Brief specifications

Pressure measuring range up to 1,400 bar

3 levels Accuracy: from 0.1% to 0.025% FS

Fully temperature compensated accuracy(-10÷50°C)

External temperature sensor RTD-PROBE (optional)

External pressure sensors PM700E (optional)

Leak test

Intrinsically safe version (DPI705E-IS)

Operating time from 1 set of batteries up to 3000 hours

More details

The Druck DPI 705E Series of handheld pressure manometers and optional temperature indicators combine tough and rugged design with accurate and reliable measurements.
Compact and robust, the DPI 705E Series is designed for single-handed operation and provides many essential features required for routine maintenance and system troubleshooting.
The Druck DPI 705E-IS model is the Intrinsically Safe (IS) version for use in hazardous environments.
The DPI705E includes an internal absolute, gauge, or differential sensor. Any number of remote sensors can be used with a single DPI705E as all sensors hold their own calibration data and are supplied with a 2.9m (9.5 feet) cable.
RTD-INTERFACE
This optional add-on probe interface enables users to perform plug and play temperature measurements, displaying units as resistance or temperature.


ВимірюванняГенерація (Імітація)


DPI705E Handheld manometer

- Pressure measuring range up to 1,400 bar

- Up to 0.025% Accuracy

- Leak test

- External temperature sensor (optional)

- External pressure sensor (optional)

Featured Products

ADT918 Pneumatic Pressure Pump
ADT918 Pneumatic Pressure Pump
The 918 Pneumatic Pressure Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 1,500 psi (100 bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution u...
Код: ADT918
6664C LOW THERMAL QUAD CHANNEL SCANNERS
6664C LOW THERMAL QUAD CHANNEL SCANNERS
THE 6664C LOW THERMAL QUAD CHANNEL SCANNERS ENABLES SOFTWARE CONTROLLED, FULLY AUTOMATED NORMAL AND HIGH OHM MEASUREMENTS WITH VOLTAGES UP TO 1000 V PRODUCT FEATURES Withstands up to 1000 Vdc to provide fully automated resistance measuremen...
Код: 6664C
P5531, P5532 Dirt / Moisture Trap
P5531 Dirt / Moisture Trap Dirt / moisture traps provide an effective barrier against the transfer of moisture and dirt from an instrument under test to the sensitive piston/cylinder assembly of a pneumatic deadweight tester. Unexpected pa...
Код: P5531
Additel 100 Pressure Hoses
Additel 100 Pressure Hoses
The Additel 100 series High Pressure Hose Test Kits are designed to extend your pressure calibrations to a convenient location to adapt from one pressure connection to another. Each test kit has 5 feet of flexible hose rated to 8,000 psi (5...
Код: ADT100
Parallel Tube Liquid Bath Libra Model 785L
Parallel Tube Liquid Bath Libra Model 785L
Isotech calibration baths employ sophisticated designs to ensure calibration to the smallest of uncertainties. In 1986 Isotech purchased the interests of H N Irving & Sons Temperature division which had specialised in providing high quality...
Код: 785L
Calisto 4953
Calisto 4953
Need advice on which model? Dry Block Selection Guide These models will calibrate temperature probes from -45°C to 250°C with unrivalled flexibility. As a traditional Dry Block, several thermometers can be quickly calibrated. Accessories ar...
Код: 4953
7334 Series of AC/DC Air Resistance Standards
7334 Series of AC/DC Air Resistance Standards
Guildline Instruments 7334 Series of AC/DC Air Resistance Standards are designed for high accuracy resistance calibration in air, without the need for stabilization in a temperature controlled bath. PRODUCT FEATURES Typical AC/DC Error ...
Код: 7334
ISOTowers
ISOTowers
The most accurately defined temperatures are those defining points (fixed points) of ITS-90. The leading Primary Laboratories use large fixed point cells in deep calibration furnaces that utilise heat pipes to eliminate temperature gradient...
Код: ISOTowers
Trace Moisture Transmitter - Michell Pura
Trace Moisture Transmitter - Michell Pura
This small transmitter is a rugged, self-contained hygrometer for the measurement of trace moisture content in ultra-high purity gases. Simple to use and install, the Pura is available in 2-wire, 3-wire and hazardous area versions and is f...
Код: Pura
Miniature Fixed Resistor Model 836
Isotech produces a miniature resistor with ultra-low temperature coefficient and ultra-high stability. This is achieved because the resistors are oil filled and hermetically sealed. The function of hermetic sealing is to eliminate the ingre...
Код: 836
ADT681 Digital Pressure Gauge
ADT681 Digital Pressure Gauge
DISCONTINUED. RECOMMENDED REPLACEMENT ADT681A With advanced microprocessor technology and state-of-the-art silicon pressure sensors, the 681 series digital pressure gauges provide an accurate, reliable, and economic solution for a wide r...
Код: ADT681
Additel 878 Reference Dry Well Calibrator
Additel 878 Reference Dry Well Calibrator
Additel takes temperature calibration to the next level with the ADT878 reference dry block calibrators. If you're looking for the best dry-block calibrator on the market, you've found it! Additel's commitment to continuous improvement, qua...
Код: ADT878-700
8104 precision multimeter
8104 precision multimeter
The 8100 Series from Transmille is the most advanced multimeter available on the market. Featuring a full colour screen, the 8100 Series offers a wide range of functionality and covers a wide range of input parameters whilst achieving break...
Код: 8104
6634A SERIES
6634A SERIES
GUILDLINE INSTRUMENTS 6634A SERIES is a modular series of Resistance Standards that can be rack mountable or simply set on a bench. The 6634A Series provides a set of up to 10 precision resistance standards enclosed in a temperature control...
Код: 6634A
ADT959A Hydraulic Pressure Test Pump
ADT959A Hydraulic Pressure Test Pump
The new Additel 959A Hydraulic Pressure Test Pump is a benchtop pressure pump designed to generate pressure to 40,000 psi (2,800 bar). This pump incorporates a dual-piston system which is ideal for filling large volume workload with the han...
Код: ADT959A
RPM4 Reference Pressure Monitor
RPM4 Reference Pressure Monitor
RPM4 is much more than a traditional pressure indicator State of the art performance from very low pressure to 280 MPa (40 000 psi)… advanced on-board features…compact and rugged…full local and remote communications…RPM4 is the perfect sol...
Код: RPM4
P5515  Hydraulic Pressure Test Pump
P5515  Hydraulic Pressure Test Pump
These instruments are used for checking pressure measuring instruments against master test gauges, indicators or transducers. These hydraulic pressure comparators provide a quick and easy solution for checking pressure measuring instruments...
Код: P5515
ADTS552F Air data test system
ADTS552F Air data test system
The ADTS552F air data test set is a portable two-channel flightline pitot static tester with large pitot static volume capability for use on a wide range of aircraft, from light aircraft to wide body passenger and freight aircraft. It provi...
Код: ADTS552F
6564 High to Ultra-High Resistance Scanners
6564 High to Ultra-High Resistance Scanners
Guildline’s 6564 High to Ultra-High Resistance Scanners are the first commercial scanners capable of operating with measurement capabilities to 10 PΩ’s and at voltages to 1000 Vdc. This capability greatly improves the measurement and calibr...
Код: 6564
Stirred Ice Bath Model 813
Stirred Ice Bath Model 813
The most used temperature for calibration is 0°C. The normal way of creating 0°C is via a mixture of ice and water in a Dewar Flask. However, this can give errors of up to 4°C because water is densest at 4°C and so as the ice melts the temp...
Код: 813
Спасибо!