-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: HC2A
Brief specifications
More details
Filter carriers protect the humidity and temperature sensors and probes against mechanical damage. Filters act as a protective barrier against contaminants/pollutants that can influence the sensor. When choosing the correct combination of filter carrier and filter there are many factors to consider. Specific conditions such as high air velocities, pollutants in the air, disinfection and cleaning routines, mechanical impacts, high bioactivity, condensation, airborne chemical contaminants and required response time are some of the many considerations.
Filters and Filter Carriers for Rotronic HC2A Humidity Probes
-Steel 1.4301, Sintered steel, Polycarbonate filter carrier
Polyethylene filter: 40-50µm, -50…100 °C; 20µm, -50…100 °C; 40µm, -50…100 °C
wire mesh filter: 10µm, -50…100 °C; 10µ, -100…200 °C; 20…25µm, -100…200 °C
Sintered steel filter: 25µm, -100…200 °C; 25µm, -100…200 °C
Teflon filter: 10µm, -80…200 °C
Featured Products
The XB32A OEM transmitter consists of a cable probe and PCB without housing. Thanks to its compact size, high accuracy and various selection
possibilities, the transmitter can be adapted to customer wishes and used practically everywhere...
-327x226.jpg)
Pneumatic hose terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets. Safe area use 2 m/3.28 ft pneumatic hose. Maximum pressure 20 bar/300 psi...
Precision Flexible AC Current Transformer SymmProFlex® FCT 2161 is based on Rogowski principle designed to measure alternating current and to transform the measured current to standardized 5 A level...
Suitable for trace oxygen measurements from 0.1 ppm through to purity applications at 100% oxygen, these rugged portable instruments share the same advanced sensor technology as the online process oxygen analyzers ensuring confidence in the...
The DPI 610 Aeronautical version is a low cost yet flexible portable calibrator for precision leak testing of aircraft pitot static systems. Configured as a single channel unit for testing either altitude or airspeed parameters, it is fully...
The next generation pressure sensor
One Sensor. No Compromises.
Discover ADROIT6200 - the first release of ADROIT6000 industrial pressure sensors family.
ADROIT6200 is a high performance, robust pressure measurement device. It combin...
LMF® – LaminarMasterFlow®
High-precision flow measurement of gas and air
The EP LMF® – LaminarMasterFlow® is a complete system for high precision flow measurement of gas and air (volume and mass flow). The LMF® system consists of a fl...
-327x226.jpg)
The 670SQ is our latest thermometer, to be specifically designed to give optimum performance up to the aluminium point. Its construction permits the four internal platinum lead wires to expand and contract in the same manner as those of sil...
-327x226.jpeg)
Need advice on which model? Dry Block Selection Guide These models will calibrate temperature probes from -45°C to 250°C with unrivalled flexibility. As a traditional Dry Block, several thermometers can be quickly calibrated. Accessories ar...
The HygroFlex3 series is ideal for all applications where good accuracy measurement of humidity and temperature is of critical importance. The transmitters can be used in a wide range of industries...
The ADT601Ex intrinsically safe digital pressure gauge is designed to improve upon traditional dial pressure gauges by providing a reliable and accurate digital solution for a minimal investment. The included Bluetooth technology allows use...
The Additel 793 pressure controller combines the latest control/measure technology, modular design and easy to use/maintenance features into a single users friendly device. The Additel 793 provides pressure control up to 15,000 psi (1,000 B...
-327x226.jpeg)
The TRU (Thermocouple Reference Unit) supplies a stable and accurate 0°C, or elevated reference temperature. It is a self-contained all solid-state unit using Peltier technology which provides maintenance free operation. The TRU features ra...
The ADTS542F air data test set is a small, lightweight and cost-effective portable two-channel flightline pitot static tester for ‘Aircraft on the Ramp’ testing. The ADTS542F is also ideal for any aircraft with low pitot static volume deman...
-327x226.jpeg)
-327x226.jpeg)
The Isotech Model 915 Liquid Bath is suitable has a wide temperature range, using silicon oils and other suitable liquids. All components in contact with the liquid are of stainless steel, and are insulated with materials which are complete...
-327x226.jpeg)
The Oberon R uses a Sodium heat Pipe to ensure an exceptionally low temperature gradient along the furnace core. It is ideal for the realization of Aluminium, Silver or Copper ITS-90 Fixed Points. It may be used as a blackbody source over t...
GUILDLINE’S NEW 6640T SERIES OF TEMPERATURE BRIDGES are redesigned to provide better uncertainties, faster measurement rates and more operational capability. PRODUCT FEATURES Best Accuracy: ± 0.015 ppm with 1 mA of Current Linearity: < ± 0....
Additel’s new Multi-functional Documenting Process Calibrator series takes portability, functionality, and accuracy to a whole new level and packages it with an intuitive and easy to use color touchscreen display. This series includes an ad...
The Easidew PRO I.S. intrinsically safe dew-point transmitter measures moisture in demanding process and refinery applications in either gases or non-polar liquids.
It offers a wide measurement range of –110 to +20°Cdp, is easily integra...
Probes are suitable for use with all Isotech thermocouple reference units or may be used with any other equipment including ice flasks and ice point reference units. They can be supplied to suit a single thermocouple, or up to ten double ju...
