-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: 66252
Brief specifications
More details
The 66252 DMM Switch is a unique option for 6625A Resistance Measurement Systems. This very high isolation switch allows the 6625A System Resistance Standards to be used for both Measurement and Source Applications without having to disconnect and reconnect wires. PRODUCT FEATURES Allows System’s Resistance Standards to Be Used as Resistance Sources Available In Bench Configurations (No Modification to Existing 6625A Systems) Usable Resistance Range 1Ω to 100 MΩ Input Impedance >1014 Use With Any Number of Scanners and Includes Scanner Low Thermal Short Includes Lead Compensation Procedures For Low Resistance Connection to Long Scale DMM’s
Документация
66252 DCC Resistance Bridges
Featured Products
The S4000 TRS measures very dry dew points down to -100 °C (-148 °F) with ±0.1 °C accuracy. It features excellent stability and reproducibility across its entire measurement range and is used in calibration and standards laboratories worldw...
The GPR-3500 MOVR Portable Oxygen Purity Analyzer is the only electrochemical oxygen sensor based analyzer capable of measuring 100% oxygen on a continuous 24/7 basis for the purpose of verifying the purity of medical grade oxygen transport...
The 6622T Temperature Bridge Series expands upon the success of 6622A Series Resistance Bridges by utilizing new design features to offer leading uncertainties and stabilities for Temperature Bridges. The 6622T Operating Range is from 0.1 Ω...
9915-878 The protective transport case is designed for storage and safe transport of Additel ADT878 series temperature calibrators.
The case has an impact-resistant body made of corrosion-resistant PP Alloy material and provides protecti...
The microK 70 and 125 models are designed for the Primary Temperature Laboratories whilst the microK 250 and 500 models were designed for the Secondary Laboratory as well as a wide range of high accuracy industrial and scientific calibratio...
The new Additel 960 Hydraulic Pressure Test Pump is a benchtop pressure pump designed to generate pressure to 60,000 psi (4,200 bar). This pump incorporates a dual-piston system which is ideal for filling large volume workload with the hand...
The H8000 capacitive polymer element is the latest generation technology, developed to reliably and accurately measure moisture in a wide range of relative humidity applications.
This element is the core measurement element of Michell’s ne...
Guildline Instruments 7220 Asynchronous Power Analyzer is the latest in a 3 phase AC Power Measurement Laboratory Standard designed for the most demanding power measurement applications today. Innovative, patented sensing technology provide...
The micro processor control and multi-point calibration gives the PCMini52 RH probe excellent performance in terms of accuracy and linearity. The mini probe has two linear analog outputs for temperature and relative humidity...
Isotech produces a miniature resistor with ultra-low temperature coefficient and ultra-high stability. This is achieved because the resistors are oil filled and hermetically sealed. The function of hermetic sealing is to eliminate the ingre...
If you are serious about portable temperature calibration tools, then you know a good dry well calibrator is more than just a stable heat source. The Additel 875 Series Dry Well Calibrators combine excellent performance in stability, radial...
Meteorological probes with integrated electronics for two active outputs (current or voltage) and equipped with a RS485 interface. Humidity and temperature are measured with the plug-in HygroClip HC2-S3 sensor module. In addition the MP102H...
Operate confidently in cold environments, even as low as -29°C. The ruggedly designed Model 786 takes laboratory level performance into the harshest of environments.
Unlike other calibrators that cannot be used in the extreme cold, the 7...
The Rotronic HygroFlex5-EX series consists of two-channel transmitters for the exact measurement of humidity and temperature in explosive atmospheres. This device conforms to the latest international standards. The robust aluminium HF5-EX h...
The OptiCal is a premium, self-contained calibrator for humidity sensors. It features an integrated chilled-mirror reference which enables the operator to perform calibrations that are traceable to national standards.
The calibration chamb...
-327x226.jpeg)
The ADT914A Pneumatic Pressure Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 375psi (25bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up...
COMPASS® for Pressure Software
Pressure Calibration Management Software
COMPASS® for Pressure Calibration Software is a universal platform for all of your pressure calibration software needs. From piston gauges calibrating individual devi...
THE 9336 OR 9337 SERIES OF PRECISION RESISTANCE STANDARDS ARE EXCELLENT SOLUTIONS AS HIGH TO ULTRA HIGH LABORATORY RESISTANCE STANDARDS OR FOR PORTABLE APPLICATIONS REQUIRING HIGH ACCURACY WITH RESISTANCE VALUES FROM 10 MΩ TO 10 PΩ. PRODUCT...
The 8410A Portasal™ is a portable, high precision instrument from the world leader in Salinometers. This instrument will deliver salinity calculations on-board ship with laboratory level accuracy. PRODUCT FEATURES Completely Portable Yet Of...
The 7050LP low pressure digital pressure indicator, part of the versatile Series 7250 family, is specifically designed to meet the demanding performance requirements of calibrating low pressure sensors, transducers, mechanical gauges, porta...
