-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: GPR-1900
Brief specifications
More details
A panel mounted oxygen analyser with a remote sensor allows flexibility of installation. The GPR-1900 gas analyzer is suitable for trace oxygen measurements as low as 0-10 ppm; the GPR-2900 measures O2 up to 100%. The remote sensor block allows a very easy oxygen sensor replacement for simple and fast maintenance and low cost of ownership. All versions can be locked manually to a single range or auto-range. The user is always aware of the oxygen measurement range used via the range ID output.
AII GPR-1900 Oxygen Analyzer With Remote Sensor
-Accuracy: < 2% of FS range under constant conditions
Ranges: 0-1, 0-10, 0-100, 0-1000 PPM, 0-1%, 0-25% Auto-ranging or manual lock on a single range
Application: Oxygen analysis in inert, helium, hydrogen, mixed and acid/ non-acid (CO2) gas streams
Area Classification: General purpose
Flow: Not flow sensitive or Sensitive; recommended flow rate 2 SCFH
Pressure: Inlet - regulate to 5-30 psig to deliver 1-2 SCFH flow; vent - atmospheric
Sensor Model: GPR non-acid (CO2) gas streams or XLT gases containing > 0.5% CO2
Power: Universal; specify 100/120/220/240 VAC or 12-28 VDC
Temp. Range: -10ºC to 45ºC (GPR), -20ºC to 45ºC (XLT sensor)
Featured Products
Choice of male 1/4NPT, 1/4BSP, or M20x1.5 fitting type to the following connections, each as male or female:
- 1/8BSP
- 1/4BSP
- 1/2BSP
- 3/8BSP
- M10x1.0
- M14x1.5
- M20x1.5
- 1/8NPT
- 1/4NPT
- 1/2NPT
- 3/8NPT
(Designed for a...
This small transmitter is a rugged, self-contained hygrometer for the measurement of trace moisture content in ultra-high purity gases.
Simple to use and install, the Pura is available in 2-wire, 3-wire and hazardous area versions and is f...
The micro processor control and multi-point calibration gives the PCMini52 RH probe excellent performance in terms of accuracy and linearity. The mini probe has two linear analog outputs for temperature and relative humidity...
These thermocouples are suitable for use as references in Isotech Dry Blocks and for use with temperature indicators. Details of our laboratory grade Standard Thermocouples with separate cold junctions can be found in our publication “Solut...
Simple to use and rugged, the Easidew portable hygrometer is the ideal tool for a wide range of on-site maintenance spot checks and dry dew-point online measurements. The robust integral sample system and wide measurement range ceramic meta...
The HygroSmart HS3 an advanced, digital probe with measured or calculated outputs and a rugged 10 bar pressure rated housing, designed to provide reliable humidity measurement for process control in a wide range of applications. The HS3 pro...
The Fluke Calibration 700HPPK Pneumatic Test Pump Kit generates and adjusts pneumatic pressures up to 21 MPa (3000 psi), without requiring a nitrogen bottle or other external pressure supply. It supplies pressure to devices under test (DUTs...
Description
The Isotech Model 526 is a portable low temperature calibration source designed for both laboratory and field use. It provides controlled, stable temperature generation down to −115°C, supporting reliable calibration of sensors...
The next generation Advanced Quartz Crystal Microbalance analyzer from Michell Instruments is designed to provide reliable, fast and accurate measurement of trace moisture content in a variety of applications where keeping moisture to a min...
-327x226.jpg)
The Pneumatic Druck PACE5000 / PACE6000 Modular Pressure Controllers bring together the latest control and measurement technology to offer an elegant fast flexible and economical solution to pressure control for automated production, test a...
-327x226.jpeg)
The millisKanner channel expander has eight input channels, and each can be configured individually for SPRT, PRT, Thermistor or Thermocouple input. This gives ultimate flexibility with no need for separate devices for resistance or thermoc...
-327x226.jpeg)
Need advice on which model? Dry Block Selection Guide The Hyperion and Drago have large calibration volumes, 65mm x 160mm deep, which makes them ideal to use as portable liquid baths. Stirred liquid baths are suitable for temperature sensor...
-327x226.jpeg)
-327x226.jpeg)
The Isotech Model 915 Liquid Bath is suitable has a wide temperature range, using silicon oils and other suitable liquids. All components in contact with the liquid are of stainless steel, and are insulated with materials which are complete...
GPR-1200 MS-2 (ATEX)
Designed for spot-checking ultra-high purity gases, the
GPR-1200 MS-2 has a range of 0-1 ppm and LDL of 5 ppb
O2 – the lowest oxygen measurements available with a
portable instrument. ATEX-approved version available...
Software Package ELMA is dedicated for electricity meter testing and calibration. The package contains routines for control of hardware, data acquisition, evaluation of measurements, meter data exchange, output of documents, data archiving,...
WinPrompt Calibration Software
WinPrompt calibration software increases calibration efficiency by providing full-color, Windows-based measurement for your process. This easyto-use software can be used independently or in conjunction with t...
Analytical Industries’ high-accuracy portable oxygen analyzers are for applications which must be controlled at several defined measurement points. The GPR-3500 model has a compact, rugged enclosure and includes stainless steel wetted parts...
The 8400B “Autosal” Laboratory Salinometer is the “Industry Standard” for salinity measurements. A very stable temperature control bath and heat exchanger maintain the sample at a precisely defined temperature during analysis, avoiding the ...
The MC620 module carrier attaches to the head of the DPI620 to provide two independent pressure measurement channels. These can be fitted with any PM620 pressure module from 25 mbar to 1,000 bar (10 inH2O to 15,000 psi). A simple screw fit ...
Quite simply the Isotech TTI-22 High Accuracy Thermometer sets new standards in the price to performance ratio for industrial and secondary resistance thermometry. If you need high accuracy at an affordable price you have to look at the TTI...
