-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: HC2A-SH/S3H
Brief specifications
More details
The HC2A series are digital humidity-temperature probes based on the AirChip3000 technology. These probes
feature a UART serial interface and two 0…1 V linear analog output signals.
The HC2A probes are designed for use with the HygroClip2 generation of ROTRONIC humidity-temperature
instruments: transmitters, data loggers, hand-helds, etc.
The HC2A probes can also be used as a stand-alone device using either the analog output signals or the probe
digital interface. Connectors, cables and digital interface adapters are available to this purpose. Digital
integration with OEM applications is facilitated by the probe communication protocol options.
Humidity Temperature Probes - Rotronic HC2A-SH/S3H
-Accuracy @23°C: ±0.5 %rh ±0.1 K
Application Range: -50..100°C; 0...100 %RH
Long term stability: <1%RH/year
Protocols: RoASCII (Default); MODBUS (setting with HW4)
Filter: Polyethylen, 40 μm
Featured Products
These Platinum / Palladium Thermocouples (Pt/Pd) are manufactured by the National Physical Laboratory (NPL) who have developed a novel physical mechanism which mitigates the mechanical stresses caused by the different thermal expansion of P...
A simple and efficient, self-contained dew-point hygrometer, with filtration and flow control, for measurement of dew point or moisture content at point of use. It uses the Easidew On-Line to measure dew point in the range –100 to + 20 °C d...
Pneumatic hose terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets.
Safe area use 1 m/3.28 ft pneumatic hose. Maximum pressure 20 bar/300 psi...
-327x226.jpeg)
Need advice on which model? Dry Block Selection Guide The Hyperion and Drago (30°C to 250°C) have large calibration volumes, 65mm x 160mm deep, which makes them ideal to use as portable liquid baths for high accuracy calibration of awkwardl...
GA21 plus
Portable gas analyser GA21 plus is a portable analyser using advanced technologies. It can be equipped with up to 8 electrochemical and NDIR sensors. The analyser has a built-in pressure sensor, large internal memory for result...
The PG9607 is the next generation of absolute pressure piston gauge from Fluke Calibration. It supports the use of a 100 kg mass set to define gauge and absolute pressures from 11 to 500 kPa with a single piston-cylinder. The PG9602 is the ...
-327x226.jpeg)
The Gemini R 550 Portable Blackbody Calibration Source allows for calibration of noncontact infrared thermometers over the temperature range 30°C to 550°C. It is suitable for use as a primary radiation source for infrared thermometers. Labo...
The ADTS542F air data test set is a small, lightweight and cost-effective portable two-channel flightline pitot static tester for ‘Aircraft on the Ramp’ testing. The ADTS542F is also ideal for any aircraft with low pitot static volume deman...
GasPro – Mobile gas sampler
Representative cyclical gas sampling to determine gas quality in the gas network.
Analysing the gas quality in the gas network is essential to monitor technical specifications and ensure correct billing. Th...
Transportable hydrocarbon dew-point analyzer system for field-measurements in natural gas. Suitable for IEC Zone 1 or 2 hazardous area, NEC Class I, Division 1 Groups B, C, D.
A complete transportable natural gas dew-point analysis system ...
Isotech produces a miniature resistor with ultra-low temperature coefficient and ultra-high stability. This is achieved because the resistors are oil filled and hermetically sealed. The function of hermetic sealing is to eliminate the ingre...
The Rotronic HygroFlex5-EX series consists of two-channel transmitters for the exact measurement of humidity and temperature in explosive atmospheres. This device conforms to the latest international standards. The robust aluminium HF5-EX h...
The S4000 TRS measures very dry dew points down to -100 °C (-148 °F) with ±0.1 °C accuracy. It features excellent stability and reproducibility across its entire measurement range and is used in calibration and standards laboratories worldw...
-327x226.jpeg)
-327x226.jpeg)
Precision calibration of thermometers calls for the use of stirred liquid calibration baths. The Hydra models set new standards in terms of price to performance ratio. Now Calibration Engineers and Metrologists can choose from a range of ba...
The Easidew I.S. (intrinsically safe) is designed to measure trace moisture and water dew-point in hazardous area applications. It is certified for measuring trace moisture in flammable or explosive gases and a wide range of non-polar liqui...
THE 6664C LOW THERMAL QUAD CHANNEL SCANNERS ENABLES SOFTWARE CONTROLLED, FULLY AUTOMATED NORMAL AND HIGH OHM MEASUREMENTS WITH VOLTAGES UP TO 1000 V PRODUCT FEATURES Withstands up to 1000 Vdc to provide fully automated resistance measuremen...
The Easidew 34 is a dew-point transmitter with a 3/4” process connection. Designed for use in industrial conditions, it has a wide measurement range from -110 to + 20 °C dew point.
Based on Ceramic Metal-Oxide Moisture Sensor the Easidew 3...
The HC2-A extension cables extend the HC2-A probes away from transmitters, handheld instruments or data loggers and data loggers. The HC2-A extension cables can be used up to 5 meters. For longer cable runs, use the AC3003 signal amplifier ...
-327x226.jpeg)
The multi-functions of the Europa-6 is a unique award winning concept from Isotech. The Europa-6 is a complete calibration laboratory working over the temperature range 65°C below ambient temperature to +140°C. It permits the calibration of...
Additel’s new Multi-functional Process Calibrator series takes portability, functionality, and accuracy to a whole new level and packages it with an intuitive and easy to use color touchscreen display. The ADT226 is a powerful yet cost effe...
