-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: HC2-AW
Brief specifications
More details
The ROTRONIC probe type HC2-AW-(USB) measures the humidity and the temperature of hygroscopic products. The digital probe signal is processed by an indicator such as the HygroLab C1 or the HP23- AW-A, or from a pc (HC2-AW-USB).
Water Activity Probe - Rotronic HC2-AW
-Operating ranges: Humidity 0...1 aw / 0…100 %rh Temperature -40…85 °C
Output signal: Digital UART or USB
Accuracy at 23 °C: Humidity ±0.008 aw / ±0.8 %rh / Temperature ±0.1K
Dimensions: 60mm / ∅ 68mm
Featured Products
GasPro – Mobile gas sampler
Representative cyclical gas sampling to determine gas quality in the gas network.
Analysing the gas quality in the gas network is essential to monitor technical specifications and ensure correct billing. Th...
The RPS/DPS 8000 is the first product to incorporate the exciting new TERPS technology. TERPS is a resonant silicon pressure sensor technology platform that provides an order of magnitude greater accuracy and stability than current pressure...
Rotronic’s new software generation HW5 replaces the long-time and successful HW4 software. The HW5 will be available as Professional version for free (with no device limitations)...
The S904 is a stand-alone and transportable humidity calibrator which is easy to use and maintain. The calibration chamber features 5 interchangeable ports to accommodate virtually any brand, type or model of humidity sensor. This calibrato...
The Model 2465 Gas Piston Gauge has a long history of serving national standards laboratories, commercial industry and government organizations as a primary pressure standard for over 40 years. Since its original introduction, enhancements ...
Software Designed to be used in conjunction with the 8000 Precision Multimeter Series and 8500 Low Thermal Scanner, ProGraph provides an instant solution for graphing stability, temperature and many other parameters. ProGraph is a 'plug and...
The SF82 Online has been developed as a fast-response, quick-to-install hygrometer system for the complete dew-point measurement range of -60 up to +60 °C dew point, which covers many moisture measurement applications...
-327x226.jpg)
Isotech’s Quick Cal range of testers are ideally suited to the less exacting applications where our larger, better specified baths are unnecessary. The Low Temperature Quick Cal covers the temperature range of -12°C to +140°C, making it ide...
The CRP5 clean-room panel is the obvious choice wherever a high degree of cleanliness is vital, in addition to precise measurement of differential pressure, humidity, and temperature. The CRP5 is used particularly in clean-rooms in hospital...
Precision Flexible AC Current Probes SymmProFlex® FCP 3121 and FCP 3321 are current probes based on Rogowski principle designed to measure alternating current up to 3000 A, 6000 A, 12000 A or more. Current Probes SymmProFlex® FCP 3121 (sing...
The accuracy of the power and energy reference meter is available up to 0.01 %. The reference meter measures all main and influencing quantities inclusive harmonic analysis and distortion of the test signals. The available power and the max...
0-25% FS ranges
Accuracy < 2% of range at constant conditions
Advanced Sensor Technology:
• Long Life Sensor, Low maintenance with typically 32 months oxygen sensor life
• Extended Operating Range
• Sensitivity 0.5% Full Scale
No Fals...
A panel mounted oxygen analyser with a remote sensor allows flexibility of installation. The GPR-1900 gas analyzer is suitable for trace oxygen measurements as low as 0-10 ppm; the GPR-2900 measures O2 up to 100%. The remote sensor block al...
The GPR-2500 is a wall-mounted Industrial Acid Analyzer for acid measurement in both general-purpose and explosion-proof rooms.
Wide choice of housing construction plastic, metal, aluminum and different finishes for standard and non-danger...
Probes are suitable for use with all Isotech thermocouple reference units or may be used with any other equipment including ice flasks and ice point reference units. They can be supplied to suit a single thermocouple, or up to ten double ju...
-327x226.jpeg)
-327x226.jpg)
Need advice on which model? Dry Block Selection Guide The Jupiter Dry Block range offers industry-leading performance in an easy to use portable package – ideal for the calibration of thermocouples and platinum resistance thermometers. It h...
The 916A Pneumatic Pressure Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 600psi (40bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to...
PPC4 is a stand-alone pressure controller intended for precision setting and control of gas pressure into a closed volume as is commonly needed for the calibration and testing of pressure measuring instruments. It has been designed to provi...
This dedicated apparatus has more than 35 years of proven use and is widely used by the worlds’ leading NMIs. In a recent International study cells from 21 of the world’s leading laboratories were inter-compared; the study used two Isotech ...
-327x226.png)
Additel’s 680A Series Digital Pressure Gauges are designed with a wide range of pressure measurement and calibration applications in mind. With features such as datalogging and Bluetooth technology included, you will find these gauges to be...
