Humidity

-Type: Naturally ventilated

Probe diameter: Ø 15; Ø 25

Number of plates: 9;10;21

Dimension: Ø 130 x 140 mm; Ø 130 x 160 mm; Ø 130 x 215 mm

Compatible probes: HC2A-(S)3; MP100A/400A; MP102H/402H

-Operating ranges: Humidity 0...1 aw / 0…100 %rh Temperature -40…85 °C

Output signal: Digital UART or USB

Accuracy at 23 °C: Humidity ±0.008 aw / ±0.8 %rh / Temperature ±0.1K

Dimensions: 60mm / ∅ 68mm

-Operating conditions: 1...40 °C

Measurement range: 0.005...1.000 aw

Accuracy: ±0.005 aw (10...30 °C), ±0.1 °C

Temperature control range: 0...60 °C

Interface: Micro USB

- Hygrometer For Trace Moisture in Pure Gases

- Features

-

- Measurement range down to -120°Cdp (1ppbV)

- Stable and repeatable measurement

- Analog and digital output

- Simple installation

- VCR process connections

- Optional display / alarm unit

- Compact design

- Fast response

- Optional Hazardous Area Approval

- Service exchange program

- Simple Dew-Point Measurement in Wide Measurement Range

- Features

-

- Integrated instrument and sampling system

- Simple installation

- Wide measurement range

- Dew point or moisture content

- Analog output, display and dual alarms

- IP65 (NEMA 12) enclosure

- Low Maintenance Quartz Microbalance Technology

- Features

-

- Precision measurement from 0.1 to 2000ppmV

- Fast response in both dry to wet and wet to dry transitions

- Simple, low cost, on-site maintenance with long service intervals

- Dryer can be replaced by the user in 10 minutes

- Accuracy of 0.1ppmV or 10% of reading, whichever is greater

- Intuitive user interface

- Ethernet or USB digital communications

- SD card data logging

- Optional internal sample handling and bypass loop

-Type: Service Cable

Used: For programming (setting, scaling, firmware update). Requires HW4/HW5

Range of application: -40…70 °C

Cable Length: 1.8m/3.6m

Connector A Side: USB

-Accuracy: ±2 %rh (10...90 %rh), ±0.2 K @ 23 °C

Application range: 0…100 %rh, -20…80 °C

Stability: ±1 %rh/year

Output signal: Modbus RTU 0 to 1, 0 to 5, 0 to 10 V

Power supply: 14…35 VDC (0…5 V/0…10 V output) 6…35 VDC (0…1 V output)

-Accuracy: ± 2 %rH (10…90 % rH)

Application range: 0…100 %rh, -20…80 °C

Stability: ±1 %rh/year

Output signal: 0–1, 0–5, 0–10 V, RS232, RS485

Power supply: 14…30 VDC (0…5 V/ 0…10 V output) 5…30 VDC (0…1 V)

-Accuracy: ±2 %rh (10…90 %rh) / ±0.2 K

Application range: -20…80 °C / 0…100 %rh

Stability: ±1 %rh/year

Output signal: 4–20 mA, 0 to 1, 0 to 5, 0 to 10 V

Power supply: 14…30 VDC (0…5 V/ 0…10 V output); 5…30 VDC (0…1 V & mA output)

-Accuracy: ±3 %rh (30...80 %rh), ±0.3 K @ 23 °C

Application range: 0…100 %rh, -20…80 °C

Stability: ±1 %rh/year

Output signal: 4–20 mA, 0 to 1, 0 to 5, 0 to 10 V

Power supply: 14…30 VDC (0…5 V/ 0…10 V output); 5…30 VDC (0…1 V & mA output)

-Control probe specification ±0.8 %RH (10…30 °C), ±2 %RH (0…60 °C) ±0.1K (10…30 °C), ±0.3K (0…60 °C)

Working volume: 1.5 litres 17 litres

Typical calibration uncertainty: ±1.5 %RH (k=2) at 23 °C, ±0.15 °C (k=2) 15...50 °C

Sensor: HygroClip2, capacitive RH sensor, Pt100 temperature sensor

Generation method Mixed flow with desiccant drier cell and piezoelectric humidifier; Peltier thermoelectric element with radial chamber mixing fan

- For Moisture Control in Rail Rolling Stock Compressed Air Dryers

- Features

-

- M12 electrical connector

- Dew-point measurement range –60 to +60 °Cdp (-76 to +140°Fdp)

- Fast response

- 316 stainless steel IP66 construction

- Traceable calibration certificate

- Accuracy ±2°Cdp (±3.6°Fdp)

- G 1/2” BSP process connection

- High-Quality Gas Handling for Reliable Moisture Measurement

- Features

-

- Indoor panel or outdoor enclosure mounting options

- Process connection via 6mm or 1/4” tube fittings

- High quality components, stainless steel tubing and fittings

- Sample inlet pressure up to 138 barg

- Flexible filtration options

- Choice of transmitter, flow and pressure control

- Comprehensive documentation options with BS EN 10204 3.1 certification and NACE MR0175 available

- Measurement range: 0.1...2000ppmV

- Accuracy: ±10% of reading from 1 to 2000ppmV

- ±0.1ppmV between 0.1 & 1ppmV

- Inlet pressure: 2 barg

- Sample flow: 300ml/min total flow

- Analog signals: 2 x 4...20 mA or 1...5 V (selectable)

- Maximum load resistance 500 Ω for 4...20 mA and minimum load of 1M Ω for 1–5 V Digital communications: RS485 ModBus RTU Modbus TCP

- Multi-Channel Moisture Measurement in Process Gases

- Features

-

- Simple, cost efficient operation and low-maintenance

- Immune to chemical attack from H2S, mercaptans and other sulphides

- Protected against glycol or other liquid contaminants

- Accurate direct dew-point measurement at process pressure up to 45 MPa

- Moisture range from ambient to ppb level with exhaustive list of hygrometric units, including key parameters of natural gas

- Two 4-20 mA configurable outputs and digital Modbus RTU based communication

- Assured calibration integrity traceable to NPL (UK) and NIST (USA)

- User programmable or real-time active pressure compensation for moisture content calculation

- Multichannel with up to 4 independent measurement channels

- Customer configurable ES70 sample systems

- Natural Gas Water Dew-Point Analyzer

- Features

-

- EExd flameproof certified - IECEx, ATEX, cQPSus and TC TR Ex

- Complete hazardous area installation

- Single- or dual-channel measurement

- Moisture content, dew point and pressure

- Calibration traceable to NPL (UK) and NIST (USA)

- Range -120 to +30°Cdp (-184 to +86°F), 0.001 to 30,000 ppmV

- Remote global access options

- Sour gas compatible

- Field calibration maintenance

- For Very Low Dew-Point Measurement in Laboratories

- Features

-

- 0.1°Cdp accuracy

- Measurement range: -100 to +20°Cdp

- Precision 100 Ω 4 wire platinum resistance thermometer

- Dual optics detection system

- Available with VCR couplings for optimum trace moisture sampling

- Dual multi-function LED display with unit indicator

- Drift-Free Humidity Measurement for Industrial Applications

- Features

-

- ±0.1 °Cdp (±0.18 °Fdp) accuracy

- Fundamental, accurate and drift-free measurement

- Simple configuration and operation via touch screen interface

- Precision measurements to –60 °C (–76°F) dew point

- FAST – guaranteed frost formation below 0 °C (+32 °C)

- Measure at pressures up to 2 MPa (20 barg)

- USB, Ethernet, RS485 or RS232 connectivity

- Data logging to SD card or via digital comms

- For Plug-and-Measure Mobile Dew-Point Spot Checks

- Features

-

- Spot-check measurements to -60°C dew point

- 16 hours operation between recharging

- Sample at pressure or atmospheric

- Accuracy ±2°C dew point

- Traceable 13-point calibration certificate

- Rugged industrial design

- Compact and simple to use

- Sample connection kits

- Online moisture measurements -100 to +20°C dew point

- Easy Dew-Point Measurement

- Features

-

- Rapid spot-check measurements to -60°C dew point

- 16 hours operation between recharging

- Sample at pressure or atmospheric

- Accuracy +/-2°C dew point

- Traceable 9-point calibration certificate

- Rugged industrial design

- Compact and simple to use

- Sample connection kits

- Response to -60°C dew point in 3 minutes

- Chilled mirror technology with process visualization

- Accuracy: ± 0.5 ° C

- Measuring range Δ >65°C from hygrometer temperature

- Nominal working pressure 100 barg

- Ambient temperature: -30°C...+50°C

- 5" high definition color display

- Certificate Exd IECEx ATEX zone 1 IIB+H2 T3

- Quick Spot-Check Measurement of Moisture

- Features

-

- Repeatedly fast measurements at low pressure from less than 15 minutes for T95 to -60°C (-76°F)

- Higher pressure measurements possible – up to 350 barg (5076 psig)

- Long battery life: up to 48 hours of typical use between charges

- Intuitive application kits allow quick and straightforward connection to your sample point

- Durable, yet easy to handle and operate: designed for use in industrial environments

- Lightweight: less than 1.5kg (3.3lb)

- 13-point traceable calibration certificate

- Blends two or three gases from Air, O2, N2, CO2, CH4 & H2

- Select series MFC’s programmed with all the above gases

- Flame arrestors fitted for additional safety

- Quick-Connect fittings, wheels and retractable handle for ease of use

- Rugged case that is water-tight (with lid closed & locked)

-Measurement range: -100…200 °C1 / 0…100 %rh

Accuracy at 23°C: ± 1.0 %rh

Electronics operating range: -40…85 °C / 0…100 %rh

Output signals (analog): 0...1 V, 0...5 V, 0...10 V, 0(4)...20 mA

Power supply: 15… 40 VDC / 12 …28 VAC

- Fast and Precise Moisture Measurement in Natural Gas

- Features

-

- D-MET system: Factory-ready for varying gas compositions. For example, after stream blending or injection of shale gas or biomethane to a network.

- Operating range down to 1 ppmV

- Sour gas compatible

- Simple installation and setup

- Lowest maintenance

- IECEx, ATEX and cQPSus certified for EExd flameproof

- Integrated sample handling

- Proven Michell Instruments quality: 40 years of expertise in moisture measurement built into the design

- For Moisture Measurement in Process Liquids

- Features

-

- Simple, cost-efficient operation and low maintenance

- Retrofit functionality, easy to integrate into existing sampling or distribution systems

- High integrity moisture in liquid measurement from 0.01 ppmW to saturation point

- Multi-channel with up to four completely independent measurement channels

- Robust design for undisturbed operation in many non-polar liquids over a long time

- Two 4-20 mA configurable outputs and digital Modbus RTU-based communication

- Replaceable sensor element with Michell Calibration Exchange Service for reliable cost-efficient calibration

- NIST and NPL traceable calibration

- For Use with Easidew I.S. and Easidew PRO I.S.

- Features

-

- Loop powered 4-20mA indicator. Intrinsically safe certified with ATEX, IECEx, and FM

- Operating temperature between -40 and +70°C

- Bold 34mm high 4-digit display with optional backlight

- Robust GRP enclosure providing IP66 protection. Can be mounted by itself or inside a sampling system enclosure

- Built-in terminal compartment for easy wiring

- Two optional galvanically isolated solid-state alarm outputs

- Low-Cost Gas Sampling with Filtration and Flow Control

- Features

-

- Universal configuration for atmospheric or line pressure dew-point measurements

- Integral particulate filter

- Metering valve for flow control

- Single block design for faster measurement response

- Gas pressure to 1 MPa (10 barg) with a high-pressure option to 21 MPa (210 barg) available

- Hydrocarbon Dew Point and Moisture Analyzer for Natural Gas

- Features

-

- Moisture:

- Measurement range: 1ppmV to 1000ppmV.

- Measurement technology: Tuneable Diode Laser Spectroscopy.

- Latest generation of TDLAS – moisture measurements are independent to changes in background gas composition.

- Class-leading accuracy ±1ppmV even with widely varying gas compositions.

- Hydrocarbon Dew-Point:

- Fully automatic analysis.

- Fundamental chilled mirror principle.

- HCDP measurement range: up to ∆ 55K measurement depression from main unit operating temperature.

- HCDP measurement technology: direct photo-detection of hydrocarbon condensate.

- General:

- Low maintenance.

- Easy to install with a small footprint.

-Measurement range: 0..100 %RH

Accuracy at 0...30 °C: 10…95 %RH: ±1.5 %RH

Measurement range: -50...100 °C

Accuracy at 0...30 °C: ±0.3 K

Range of application: -40...85 °C

-Measuring Range: -50…100°C

Operating Range: -40…80 °C

Accuracy at 23°C: ±0.8 %RH / ± 0.1 K (typically value), probe dependent

Power Supply: 5…24 VDC/15…24 VDC

Output Signals: 0…1/5/10 VDC; 0(4)…20 mA

- Displays %RH and temperature, plus dew-point, absolute humidity and wet bulb temperature

- Simple to operate

- Long term stability: ±1% RH over 12 months

- Standard probe (ø19mm)

- Weight: 90g

- Intrisically Safe Dew-Point Measurement in Hazardous Areas

- Features

-

- Measurement range –110 to +20°Cdp

- ATEX, IECEx, cCSAus, FM, TC TR Ex certified

- Accuracy ±1°Cdp

- 2-wire 4–20 mA output

- Traceable 13-point calibration certificate

- 450 barg pressure rating

- Alternative process connections available

- Material certification to BS EN 10204 3.1

- Moisture in gases and liquids

- Service exchange program

- Oxygen Service cleaned

- Moisture Measurement in Hazardous Areas

- Features

-

- Measurement ranges -110 up to +20°Cdp

- Dew point or ppmV moisture content output

- 2-wire loop power connection

- Accuracy ±2 °Cdp

- Traceable calibration certificate

- Easidew I.S. IECEx, cCSAus, FM and ATEX approvals

- Low cost of ownership and easy maintenance with sensor exchange program

- 316 Stainless steel sensor and sample blocks

- 5/8” UNF, 3/4” UNF, G 1/2” process connections

- KF40 Glove box flange

- Oxygen service cleaned

- Compact Sensor Modul

- Features

-

- Range of application -40…85 °C / 0…100 %RH

- Accuracy: ±1 %RH (5…95 % RH), ±0.2 K

- HygroSmart 3 technology