-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
-1000x1000.jpg "MC620G Module Carrier")
-1000x1000.jpg "MC620G Module Carrier")
-1000x1000.jpg "MC620G Module Carrier")
-1000x1000.jpg "MC620G Module Carrier")
Код: MC620G
Brief specifications
More details
The MC620 module carrier attaches to the head of the DPI620 to provide two independent pressure measurement channels. These can be fitted with any PM620 pressure module from 25 mbar to 1,000 bar (10 inH2O to 15,000 psi). A simple screw fit means no tools are required and ensures both a high integrity pressure seal and a reliable digital interface. Even the pressure adapters are interchangeable and only require a finger tight fit The carrier is designed for pressure safety and will automatically seal if a module is not fitted or if the user attempts to remove it
MC620G Module Carrier
- 2 independent pressure channels
- Simple to re-range
- Pressure protection
- Safe and Hazardous (IS) versions available
Featured Products
Additel’s new Multi-functional Documenting Process Calibrator series takes portability, functionality, and accuracy to a whole new level and packages it with an intuitive and easy to use color touchscreen display. This series includes an ad...
-327x226.jpg)
Isotech’s Quick Cal range of testers are ideally suited to the less exacting applications where our larger, better specified baths are unnecessary. The Low Temperature Quick Cal covers the temperature range of -12°C to +140°C, making it ide...
The 919A High Pressure Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 2,000 psi (140 bar). With a long lever, it just takes 30 seconds to reach 2,000 psi (140 bar). A high-quality screw press is ...
IDOS (Intelligent Digital Output Sensor) are smart, Universal Pressure Modules that are interchangeable between any IDOS compatible Druck instruments. They are truly “Plug and Play” modules in that they do not require calibration or set-up ...
-327x226.jpeg)
Isotech’s Quick Cal range of testers are ideally suited to the less exacting applications where our larger, better specified baths are unnecessary. The Low Temperature Quick Cal covers the temperature range of -12°C to +140°C, making it ide...
The GPR-1800 series of intrinsically safe trace oxygen analyzers are designed for use in demanding process environments where the low detection limit down the AII’s industrial oxygen sensors can be well utilized. Typical for Analytical Indu...
The Working Standard WS 2x20 is a single-phase (WS 2120) and three-phase (WS 2320) precision reference meter for electrical power and energy measurement, dedicated to on-site meters testing. The device can be used also as hand-held unit for...
The most used temperature for calibration is 0°C. The normal way of creating 0°C is via a mixture of ice and water in a Dewar Flask. However, this can give errors of up to 4°C because water is densest at 4°C and so as the ice melts the temp...
Request Information Service The PCR from Michell is a transportable gas blender in a flight case, suitable for calibrating a multitude of gas analyzers at virtually any location and has been designed to allow the blending of two or three...
A high pressure hydraulic hose rated to 1,000 bar (15,000 psi) and terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets. The hose is self sealing to avoid leakage...
The Additel 100-FLT-1K is a pneumatic filter and liquid trap covering from -15 to 1,000 psi (-1.0 to 70 bar). This filter is ideal for your pneumatic measurement or calibration applications and contains an easy to use drain valve for removi...
The industry leading 3200B series provides by far the fastest and safest solution for calibration of Loop, RCD, PAT's and insulation testers. By using the 3200B series, calibration time can be drastically reduced, while superior accuracy me...
The 3000A Series multiproduct calibrators have been designed to help you and your business, allowing a wide range of calibration work to be performed quickly, accurately and economically. Modern calibration is a competitive market, and cost...
The PV621, 622 and 623 manual pressure generating base stations
Features
• A uniquely capable, re-arrangeable and self-contained pressure test system
• Advanced pressure generation
— 95% vacuum to 20 bar (300 psi) pneumatic
— 95% vacuu...
Pneumatic hose terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets. Safe area use 2 m/3.28 ft pneumatic hose. Maximum pressure 400 bar/5800 psi...
-327x226.jpeg)
The milliK Precision Thermometer from Isotech sets a new standard for the high accuracy measurement and calibration of Platinum Resistance Thermometers, Thermistors, Thermocouple and Process Instrumentation (4-20mA) over the range -270°C to...
The HygroFlex1 series is the latest development in inexpensive HVAC transmitters for relative humidity and temperature. The devices are equipped
with the tried-and-tested Rotronic Hygromer® IN-1 sensor and boast unbeatable value for money....
The HygroGen2 is a generator of controlled relative humidity and temperature environments,
primarily for use in calibrating humidity instrumentation, but is also well suited to the
calibration of temperature instrumentation, particularly ...
The Additel ADT103 is a versatile adapter kit designed for precision and ease of use in pressure calibration tasks. It includes hand-tight quick connectors compatible with various male and female thread types such as NPT, BSP, and metric co...
