-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: DPI610
Brief specifications
More details
The DPI 610 Aeronautical version is a low cost yet flexible portable calibrator for precision leak testing of aircraft pitot static systems. Configured as a single channel unit for testing either altitude or airspeed parameters, it is fully self-contained with manual pressure generation and venting facilities. Scaling is provided in aeronautical units and the instrument also includes switch tests and other functions. The pneumatics enable a maximum rate of climb of 6,000 ft/min when used with a 5m length x 6mm bore hose at altitudes below 15,000ft. An AN4 pressure fitting is provided and an integral vent valve for restoring ambient ground pressure conditions.
Документация
DPI610 Aeronautical Portable Aircraft Leak Tester
- Altitude and Airspeed leak testing
- Altitude and Airspeed switch testing
- Integral pressure/vacuum pump
- Accuracy to 14ft and 0.7kts
- Large, task oriented display
Featured Products
The Easidew PRO I.S. intrinsically safe dew-point transmitter measures moisture in demanding process and refinery applications in either gases or non-polar liquids.
It offers a wide measurement range of –110 to +20°Cdp, is easily integra...
The Fluke Model P5551 Pointer Remover/Punch is a specialized tool designed to efficiently remove and accurately refit the pointer of a pressure gauge. It is particularly useful for maintenance and calibration tasks involving pressure measur...
The DPI104 is a microprocessor-controlled digital pressure gauge that combines precision and functionality in a compact, robust, and simple-to-use package. The DPI 04 matches advanced silicon sensor technology with several convenient design...
Service cable for Rotronic Transmitters.Compatible with HF3/4/5/7/8, HL20D...
Choice of male 1/4NPT, 1/4BSP, or M20x1.5 fitting type to the following connections, each as male or female:
- 1/8BSP
- 1/4BSP
- 1/2BSP
- 3/8BSP
- M10x1.0
- M14x1.5
- M20x1.5
- 1/8NPT
- 1/4NPT
- 1/2NPT
- 3/8NPT
(Designed for a...
GUILDLINE INSTRUMENTS provides two series of the best performing, most compact, wide-band AC current shunts that are commercially available PRODUCT FEATURES High Current Values to 100 A AC/DC Difference Essentially Zero at Power Frequencies...
Pneumatic hose terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets.
Hazardous area use 1 m/3.28 ft pneumatic hose. Maximum pressure 400 bar/5800 psi...
GUILDLINE INSTRUMENTS 7520 PRECISION AUTOMATED VOLTAGE DIVIDER is the latest innovation in DC Voltage Dividers. PRODUCT FEATURES Patented Automated Self-Alignment (i.e. True Self-Calibration) Incorporated into the Divider NO External Standa...
With advanced microprocessor technology and state-of-the-art silicon pressure sensors, Additel’s 161 and 161Ex series Digital Pressure Modules provide an accurate, reliable, and economic solution for wide range of pressure applications. Our...
ProEdit is included in the ProCal suite of programs, and can be run independently of ProCal. This allows procedures to be edited on computers that are currently not in use to avoid interfering with laboratory workflow and without requiring ...
A panel mounted oxygen analyser with a remote sensor allows flexibility of installation. The GPR-1900 gas analyzer is suitable for trace oxygen measurements as low as 0-10 ppm; the GPR-2900 measures O2 up to 100%. The remote sensor block al...
Transmilles ProCal software provides a cost effective and easy to use solution for automating calibration, from a single workstation through to a network multi discipline network. ProCal comes pre loaded with drivers for many common instrum...
PPC4 is a stand-alone pressure controller intended for precision setting and control of gas pressure into a closed volume as is commonly needed for the calibration and testing of pressure measuring instruments. It has been designed to provi...
The SF52 dew-point transmitter is a simple, cost effective moisture sensor designed for use in harsh industrial dryer applications. It is reliable and tough enough to withstand the high temperatures often associated with industrial drying.
...
Pneumatic hose terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets.
Safe area use 1 m/3.28 ft pneumatic hose. Maximum pressure 20 bar/300 psi...
-327x226.jpeg)
-327x226.jpeg)
Fast-Cal – the product range you designed During early 2004 20 experienced engineers from many parts of the world were asked to produce their ideal specification for industrial calibration. Their top ten requirements, in order of priority, ...
-327x226.jpeg)
Need advice on which model? Dry Block Selection Guide These models will calibrate temperature probes from -45°C to 250°C with unrivalled flexibility. As a traditional Dry Block, several thermometers can be quickly calibrated. Accessories ar...
-327x226.jpg)
The Additel 286 Multifunction Reference Thermometer Readout is an industry first We have combined the capabilities of a high-end reference thermometer with a highly capable data acquisition system and 8.5 digit multimeter. The ADT286 is cap...
-327x226.jpg)
For years, we’ve provided the most durable, accurate, quality pressure calibration products for field applications. The Additel 780 series controller incorporates the same durability, accuracy, and quality into a new bench top controller pa...
Water The Isotech B8 30 130 Cell is small enough to fit into portable Dry Blocks such as the Venus and Europa models. For the larger blocks like the Oceanus Isotech recommend the B12 46 210 with its increased immersion depth. Gallium and Me...
