-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: HC2(A)
Brief specifications
More details
The HC2-A extension cables extend the HC2-A probes away from transmitters, handheld instruments or data loggers and data loggers. The HC2-A extension cables can be used up to 5 meters. For longer cable runs, use the AC3003 signal amplifier for distances up to 100 meters.
Amplifier and digital Modbus / USB converter for Rotronic HC2(A) probes
-Type: Active extension cable/MODBUS Converter/USB Converter
USED: To expand the lenght between a HC2(A) probe and a transmitter, handheld or datalogger up to 100m;
Converts the HC2(A) UART to MODBUS signal;
Converts the HC2(A) UART to USB signal;
Range of Application: -40…70 °C
Available Length: 10/20/50/100 m; 5 m; 2.8 m
Featured Products
Designed to pre-warm and anneal Standard Platinum Resistance Thermometers Maintenance Free Use Automatic Temperature Cycling The Annealing Furnace, model 414, is designed to heat, anneal and cool Standard Platinum Resistance Thermometers (S...
-327x226.jpeg)
The TRU (Thermocouple Reference Unit) supplies a stable and accurate 0°C, or elevated reference temperature. It is a self-contained all solid-state unit using Peltier technology which provides maintenance free operation. The TRU features ra...
Manual pneumatic pumps Ralston DCAP are reliable tools for precise pressure calibration, designed to perform in a wide range of environments. With their straightforward and intuitive design, these pumps are an ideal choice for both laborato...
The Working Standard WS 2x20 is a single-phase (WS 2120) and three-phase (WS 2320) precision reference meter for electrical power and energy measurement, dedicated to on-site meters testing. The device can be used also as hand-held unit for...
This pneumatic comparison pressure comparator is designed for testing pressure measuring instruments against master test instruments.
This cost effective instrument provides precise control for important calibration requirements and includ...
-327x226.jpeg)
The purpose of Cal NotePad (CNP) is to automatically log and display the temperature of an Isotech calibration bath together with the unit under test. Cal NotePad can be used with baths (or indicators) without PC interfaces by the user typi...
-327x226.jpeg)
-327x226.jpeg)
Need advice on which model? Dry Block Selection Guide The Gemini range of Dry Blocks have high capacity allowing a large number of probes to be calibrated together. They are also suitable to accept large diameter probes with the block volum...
-327x226.jpeg)
When the high accuracy of the Gemini R is not necessary this product offers a cost effective solution for the calibration and testing of infrared thermometers. The QuickCal Blackbody is ideal for rapid and portable checking of infrared ther...
For high pressure pneumatic calibrations this unit interfaces with hydraulic deadweight testers providing a rateless liquid-to gas separation. Driven by a pneumatic pressure source (nitrogen bottle) and controlled by needle valves, high pre...
GB-75 and GB-152 are gas boosters with control kits intended to be used to provide a very high pressure gas supply to systems using a Fluke Calibration GPC1 High Pressure Gas Controller and other high gas pressure test and calibration syste...
-327x226.jpeg)
The multi-functions of the Oceanus-6 is a unique concept from Isotech, so unique that it is currently the subject of a patent application. The Oceanus-6 is a complete calibration laboratory working over the temperature range 45°C below ambi...
The new Additel 209 and 210 loop calibrator series combine ease of use and functionality, making them the ideal tools to troubleshoot your process loop. The ADT209 has an accuracy of 0.03% of reading whereas the ADT210 holds an accuracy of ...
-327x226.jpeg)
When we considered low temperature comparison calibration, we had to take into account Health and Safety considerations, both of the liquids used in compressors to generate low temperatures and also the liquids used in the calibration volum...
Isotech produces two eight way selector switches, one for resistance thermometers Model 954 and Model 958 for thermocouples. These switches have been designed for use in conjunction with our TTI range. The switches allow easy selection of c...
THE 6664C LOW THERMAL QUAD CHANNEL SCANNERS ENABLES SOFTWARE CONTROLLED, FULLY AUTOMATED NORMAL AND HIGH OHM MEASUREMENTS WITH VOLTAGES UP TO 1000 V PRODUCT FEATURES Withstands up to 1000 Vdc to provide fully automated resistance measuremen...
DISCONTINUED. RECOMMENDED REPLACEMENT ADT680A
We designed the 680 series digital pressure gauges with two main objectives in mind. First, to provide an affordable digital gauge to replace mechanical gauges. If you’re looking to move from...
The 1000 series has transformed the world of calibration - its innovative design utilises the latest in cutting edge digital and analogue electronics, combined with the latest manufacturing techniques to create the world's first ultra-porta...
-327x226.jpg)
Replacement AC voltage measurement probe
Attaches to the DPI620G, 30 V sockets to provide 300 VAC true rms measurement...
-327x226.jpeg)
The Hyperion R Portable Blackbody Calibration Source allows for calibration of non-contact infrared thermometers over the temperature range -20°C to 125°C. One application is the calibration of non-contact medical thermometers. With the sud...
GUILDLINE Instruments 6530 TeraOhm Bridge-Meter Series is the latest innovation in High Resistance and Ultra-High Resistance Measurements. These Bridge-Meters incorporate the latest technology for high resistance measurements providing Metr...
