Каталог
Назад

Tek Know Ukraine

Solution for metrology

With us expertly :)

Isotech Model 96178 HTSPRT

- 0°C to 1000°C

- This high-temperature thermometer is a significant contribution to better high-temperature calibration.

- Unique Aspirated Design

- High Stability

- Ultra High Purity Quartz

Brief specifications


More details

Isotech has produced over 200 high temperature thermometers which have been sold world-wide for use up to the silver point. As a consequence of our predelivery testing alone we have probably made more silver point calibrations than anyone else in the world. No one fully appreciates all the mechanisms at work when a coil of pure platinum wire inside a quartz envelope is taken to 1000°C and back. However, endless hours of study at National and International level, plus our own significant work at Isotech, have enabled us to design, build and test a superior Silver-Point Thermometer. This, we feel, is a significant contribution to better high temperature calibration. First, the 96178 can breathe, a valve in the handle can be opened to allow oxygen depletion or moist air to escape from inside the sheath and be replaced by fresh air containing 20% oxygen. The valve is normally opened at elevated temperatures and closed to prevent moisture ingress before water triple point measurements are performed. Second, the 96178 is the only thermometer ever designed with platinum heat radiation shields built into the sheath, to prevent heat radiating up inside the sheath. Third, a new ultra pure quartz, developed for the semiconductor industry at a cost of between 20 and 30 million pounds, has been adopted for use in the construction of the 96178. This new thermometer exemplifies our commitment to achieve the highest possible quality and minimum of contamination. How the thermometer is handled is most important for its stability and a purchaser will receive a comprehensive manual and tutorial with each 96178. Under some circumstances, provided the interior of the thermometer is undamaged we can replace the outer quartz sheath. Please consult us if a replacement is required. To exploit fully the accuracy of the 96178, a user will need a furnace for warming and annealing the thermometer as well as one to house the silver-point/aluminum-point cells. A Dual Calibration Furnace from Isotech combines these two features together with all the special accessories and handling know-how we have discovered.


ВимірюванняГенерація (Імітація)


Isotech Model 96178 HTSPRT

- 0°C to 1000°C

- This high-temperature thermometer is a significant contribution to better high-temperature calibration.

- Unique Aspirated Design

- High Stability

- Ultra High Purity Quartz

Featured Products

VMF – Measuring system for high-precision flow measurement of air or gas
VMF® – VenturiMasterFlow® Flow measurement of air and gases We develop and manufacture venturi tubes and nozzles as individual components or as complete VMF® systems. The VenturiMasterFlow® measuring system, or VMF® for short, is used...
Код: VMF
3130 Portable Pressure Calibrator
3130 Portable Pressure Calibrator
The 3130 Portable Pneumatic Pressure Calibrator is ideal for calibrating pressure transmitters, transducers, gauges and similar devices. The 3130 contains everything you need to generate, control and measure pressure, as well as read the ou...
Код: 3130
P5544 Two Gauge Stand
This adapter mounts directly to the test port of the calibrator and allows for the calibration of two instruments at the same time, or the connection of a reference test instrument. Maximum working pressure is 10,000 psi (700 bar)...
Код: P5544
PG7202 High Pressure Gas/Hydraulic Piston Gauge
PG7202 High Pressure Gas/Hydraulic Piston Gauge
The piston gauge’s fundamental operating principle and excellent long term stability have made it an indispensable tool in high accuracy pressure metrology. As accuracy levels increase, quality assurance requirements intensify and automatio...
Код: PG7202
Additel LogII Datalogging Software
Additel LogII is a real-time data logging and graphical software for the ADT68x series digital Pressure gauges, the ADT67x series digital pressure calibrators, and the ADT76x Automatic Pressure Calibrators. Data can be recorded in real-time...
Код: LogII
P3000 Pneumatic Deadweight Testers
P3000 Pneumatic Deadweight Testers
The P3000 Series is the culmination of over 50 years of experience in the production and design of high performance pressure standards. With features designed to improve accuracy and performance, increase reliability and simplify operation ...
Код: P3000
ADT161 Intelligent Digital Pressure Modules
ADT161 Intelligent Digital Pressure Modules
With advanced microprocessor technology and state-of-the-art silicon pressure sensors, Additel’s 161 and 161Ex series Digital Pressure Modules provide an accurate, reliable, and economic solution for wide range of pressure applications. Our...
Код: ADT161
LMF – System for high precision flow measurement of gas and air
LMF – System for high precision flow measurement of gas and air
LMF® – LaminarMasterFlow® High-precision flow measurement of gas and air The EP LMF® – LaminarMasterFlow® is a complete system for high precision flow measurement of gas and air (volume and mass flow). The LMF® system consists of a fl...
Код: LMF
9340-4T Series of precision RTD Simulators and DC Resistance Standards
9340-4T Series of precision RTD Simulators and DC Resistance Standards
Guildline Instruments 9340-4T Series of precision RTD Simulators and DC Resistance Standards are a complete family of easy to use low to ultra-low, 4 Wire resistance standards offering the best combination of accuracy and resistance range t...
Код: 9340-4T
Chilled Mirror Hygrometer - Michell S8000 Remote
Chilled Mirror Hygrometer - Michell S8000 Remote
The S8000 Remote is a compact chilled mirror hygrometer with a remote sensor. It provides it provides fundamentally derived, high precision relative humidity readings necessary for validating the results of environmental tests. It offers a...
Код: S8000 Remote
Additel 681A Digital Pressure Gauge
Additel 681A Digital Pressure Gauge
Additel’s 681A Series Digital Pressure Gauges are designed to be your favorite tool for a wide range of pressure measurement and calibration applications. With features such as datalogging and Bluetooth technology included, you will find th...
Код: ADT681A
P5514B Hydraulic Test Pump
P5514B Hydraulic Test Pump
P5514B Hydraulic Pressure Comparator The P5514B Hydraulic Pressure Comparator is a simple, robust and economical pressure test pump for calibrating gauges, switches and transducers with accurate, fine adjust capabilities. It generates pres...
Код: P5514B
HygroSmart HS3 Relative Humidity and Temperature Probe
HygroSmart HS3 Relative Humidity and Temperature Probe
The HygroSmart HS3 an advanced, digital probe with measured or calculated outputs and a rugged 10 bar pressure rated housing, designed to provide reliable humidity measurement for process control in a wide range of applications. The HS3 pro...
Код: HS3
2080 17TH EDITION ELECTRICAL CHECK BOX electrical test equipment
Designed with low cost, portability and ease of use in mind, the 2080 provides on or off site verification of RCD testers, Loop testers, Continuity and Insulation testers and multifunction testers. The 2080 is simple to use and provides the...
Код: 2080
2468A Pitot/Static Primary Standard
2468A Pitot/Static Primary Standard
The Model 2468 Pitot Static Primary Standard is specifically designed for calibrating today’s high performance flight line and Air Data Test Systems. With the new autofloat controller, operator intervention is reduced to simply applying the...
Код: 2468A
PG7601 Piston Gauge
PG7601 Piston Gauge
The piston gauge’s fundamental operating principle and excellent long term stability have made it an indispensable tool in high accuracy pressure metrology. As accuracy levels increase, quality assurance requirements intensify and automatio...
Код: PG7601
Additel 286 Multifunction Reference Thermometer Readout
Additel 286 Multifunction Reference Thermometer Readout
The Additel 286 Multifunction Reference Thermometer Readout is an industry first We have combined the capabilities of a high-end reference thermometer with a highly capable data acquisition system and 8.5 digit multimeter. The ADT286 is cap...
Код: ADT286
DPI611 Handheld Pressure Calibrator
DPI611 Handheld Pressure Calibrator
Druck DPI611 is a portable pressure calibrator that provides accuracy, reliability and ease of use. It combines a compact design with high performance, making it the ideal choice for calibration professionals. This calibrator is capable ...
Код: DPI 611
AII GPR-3500 MO Portable Oxygen PurityAnalyzer
The GPR-3500MO is supplied with panel mounted flow meter for maximum portability...
Код: GPR-3500
Hydra Model 798L
Hydra Model 798L
Precision calibration of thermometers calls for the use of stirred liquid calibration baths. The Hydra models set new standards in terms of price to performance ratio. Now Calibration Engineers and Metrologists can choose from a range of ba...
Код: 798L
Спасибо!