Каталог
Назад

Tek Know Ukraine

Solution for metrology

With us expertly :)

Isotech Model 96178 HTSPRT

- 0°C to 1000°C

- This high-temperature thermometer is a significant contribution to better high-temperature calibration.

- Unique Aspirated Design

- High Stability

- Ultra High Purity Quartz

Brief specifications


More details

Isotech has produced over 200 high temperature thermometers which have been sold world-wide for use up to the silver point. As a consequence of our predelivery testing alone we have probably made more silver point calibrations than anyone else in the world. No one fully appreciates all the mechanisms at work when a coil of pure platinum wire inside a quartz envelope is taken to 1000°C and back. However, endless hours of study at National and International level, plus our own significant work at Isotech, have enabled us to design, build and test a superior Silver-Point Thermometer. This, we feel, is a significant contribution to better high temperature calibration. First, the 96178 can breathe, a valve in the handle can be opened to allow oxygen depletion or moist air to escape from inside the sheath and be replaced by fresh air containing 20% oxygen. The valve is normally opened at elevated temperatures and closed to prevent moisture ingress before water triple point measurements are performed. Second, the 96178 is the only thermometer ever designed with platinum heat radiation shields built into the sheath, to prevent heat radiating up inside the sheath. Third, a new ultra pure quartz, developed for the semiconductor industry at a cost of between 20 and 30 million pounds, has been adopted for use in the construction of the 96178. This new thermometer exemplifies our commitment to achieve the highest possible quality and minimum of contamination. How the thermometer is handled is most important for its stability and a purchaser will receive a comprehensive manual and tutorial with each 96178. Under some circumstances, provided the interior of the thermometer is undamaged we can replace the outer quartz sheath. Please consult us if a replacement is required. To exploit fully the accuracy of the 96178, a user will need a furnace for warming and annealing the thermometer as well as one to house the silver-point/aluminum-point cells. A Dual Calibration Furnace from Isotech combines these two features together with all the special accessories and handling know-how we have discovered.


ВимірюванняГенерація (Імітація)


Isotech Model 96178 HTSPRT

- 0°C to 1000°C

- This high-temperature thermometer is a significant contribution to better high-temperature calibration.

- Unique Aspirated Design

- High Stability

- Ultra High Purity Quartz

Featured Products

DPI800/802 Pressure Indicator /Loop Calibrator
DPI800/802 Pressure Indicator /Loop Calibrator
DPI 800/802 Druck Pressure Indicator/Loop Calibrator The DPI 800 Series is a complete range of advanced, robust and simple to use hand-held instruments. Highly cost effective, these tools are ideal for test/calibration of many popular proce...
Код: DPI800/802
IO620-BSP  A set of test point adaptors
IO620-BSP  A set of test point adaptors
A set of test point adaptors to connect the tool less quick fit PV62XG, MC620G and the extension hoses to the device under test...
Код: IO620-BSP
7050LP Low Pressure Indicator
7050LP Low Pressure Indicator
The 7050LP low pressure digital pressure indicator, part of the versatile Series 7250 family, is specifically designed to meet the demanding performance requirements of calibrating low pressure sensors, transducers, mechanical gauges, porta...
Код: Fluke 7050LP
Humidity Temperature Probes - Rotronic HC2A-IC/IM/IE
Humidity Temperature Probes - Rotronic HC2A-IC/IM/IE
The HC2A series are digital humidity-temperature probes based on the AirChip3000 technology. These probes feature a UART serial interface and two 0…1 V linear analog output signals. The HC2A probes are designed for use with the HygroClip2...
Код: HC2A-IC/IM/IE
Parallel Tube Liquid Bath Libra Model 785H
Parallel Tube Liquid Bath Libra Model 785H
Isotech calibration baths employ sophisticated designs to ensure calibration to the smallest of uncertainties. In 1986 Isotech purchased the interests of H N Irving & Sons Temperature division which had specialised in providing high quality...
Код: 785H
ADT783 Pressure Controller
ADT783 Pressure Controller
These modular pressure controllers combine cutting-edge control/measurement technology, modular design, and user-friendly features. The Additel 783 controller series is optimized for high speed to pressure without compromising accuracy and ...
Код: ADT783
3200B BENCHTOP electrical test equipment calibrator
3200B BENCHTOP electrical test equipment calibrator
The industry leading 3200B series provides by far the fastest and safest solution for calibration of Loop, RCD, PAT's and insulation testers. By using the 3200B series, calibration time can be drastically reduced, while superior accuracy me...
2.8571/5 7text_lot_review
Код: 3200B
Greybody Source Model 975
Greybody Source Model 975
When the high accuracy of the Gemini R is not necessary this product offers a cost effective solution for the calibration and testing of infrared thermometers. The Greybody Model 975 gives fast accurate results with a larger sensing area. A...
Код: 975
MC620G Module Carrier
MC620G Module Carrier
The MC620 module carrier attaches to the head of the DPI620 to provide two independent pressure measurement channels. These can be fitted with any PM620 pressure module from 25 mbar to 1,000 bar (10 inH2O to 15,000 psi). A simple screw fit ...
Код: MC620G
MODEL 9200&9210DC MULTI-VALUE RESISTANCE STANDARDS & CURRENT SHUNTS
MODEL 9200&9210DC MULTI-VALUE RESISTANCE STANDARDS & CURRENT SHUNTS
THE 9200 AND 9210 PROVIDE DUAL CAPABILITIES AS A VERSATILE HIGH POWER MULTIPLE VALUE RESISTANCE STANDARD OR AS A PRECISION DC CURRENT SHUNT PRODUCT FEATURES Accuracy ± 0.01% (100 ppm) Resistance Values from 0.01 to 10,000 Ω (Model 9200) Res...
Код: MODEL
Binary Gas Analyzer for Hydrogen Monitoring - Michell XTC601
Binary Gas Analyzer for Hydrogen Monitoring - Michell XTC601
A robust, linear and stable thermal conductivity analyzer for measurement of binary gas mixes such as air in hydrogen, nitrogen, argon, helium or carbon-dioxide. The sensor is housed in a rugged casing, making it suitable for a wide range o...
Код: XTC601
ADT685 Digital Pressure Gauge
ADT685 Digital Pressure Gauge
Looking for the most advanced, best performing and modern digital pressure gauge on the market? Congratulations, you’ve just found it! Additel’s ADT685 digital pressure gauges are in a class of their own with an amazingly easy to use and re...
Код: ADT685
Meteo Transmitter for HC2A-S3 - Rotronic MP102H/402H
Meteo Transmitter for HC2A-S3 - Rotronic MP102H/402H
Meteorological probes with integrated electronics for two active outputs (current or voltage) and equipped with a RS485 interface. Humidity and temperature are measured with the plug-in HygroClip HC2-S3 sensor module. In addition the MP102H...
Код: MP102H/402H
GL1010 SERIES
GL1010 SERIES
GUILDLINE INSTRUMENTS GL 1010 SERIES of Resistance Transfer Standards are very stable and low uncertainty calibration laboratory standards for customers looking to replace the old ESI 1010 series. PRODUCT FEATURES Transfer Accuracy better t...
Код: GL1010
Additel LogII Datalogging Software
Additel LogII is a real-time data logging and graphical software for the ADT68x series digital Pressure gauges, the ADT67x series digital pressure calibrators, and the ADT76x Automatic Pressure Calibrators. Data can be recorded in real-time...
Код: LogII
ADT916A Pneumatic Pressure Test Pump
ADT916A Pneumatic Pressure Test Pump
The 916A Pneumatic Pressure Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 600psi (40bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to...
Код: ADT916A
ADT260Ex Handheld Multichannel Reference Recorder
ADT260Ex Handheld Multichannel Reference Recorder
Additel's 260Ex is an intrinsically safe handheld multichannel reference recorder with 8 different channel configurations. Armed with Additel’s most versatile and capable handheld, technicians are now able to measure and collect data for pr...
Код: ADT260Ex
Blackbody Source Model 988
Blackbody Source Model 988
First introduced to assist in relation to the SARS outbreak during the early 2000s the Model 988 is now helping in relation to coronavirus. It can be used to increase the accuracy of thermal imagers being used to measure human skin temperat...
Код: 988
PM620T Pressure modules TERPS
PM620T Pressure modules TERPS
PM620 now incorporates our unique range of TERPS resonant silicon pressure sensor technology, the PM620T and the PM620TS intrinsically safe version. Providing up to four times greater stability and higher accuracy than current pressure meas...
Код: PM620T
Stirred Ice Bath Model 813
Stirred Ice Bath Model 813
The most used temperature for calibration is 0°C. The normal way of creating 0°C is via a mixture of ice and water in a Dewar Flask. However, this can give errors of up to 4°C because water is densest at 4°C and so as the ice melts the temp...
Код: 813
Спасибо!