-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: IO620-HOSE-P1
Brief specifications
More details
Pneumatic hose terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets.
Safe area use 1 m/3.28 ft pneumatic hose. Maximum pressure 400 bar/5800 psi
IO620-HOSE-P1 Pneumatic hose
See DPI 620 G Data Sheet
Featured Products
These thermocouples are suitable for use as references in Isotech Dry Blocks and for use with temperature indicators. Details of our laboratory grade Standard Thermocouples with separate cold junctions can be found in our publication “Solut...
SMF® – SonicMasterFlow®
Highly precise flow measurement of gases and air
The SMF® – SonicMasterFlow® series are calibration systems for high-precision flow measurement of air and other gases (optional) (volume and mass flows) using cr...
-327x226.jpg)
Dirt moisture trap Prevents contamination of the PV621 and 622 pneumatic systems and cross contamination from one device under test to another. The IDT connects directly to the PV621 and 622 pressure port and replicates the quick fit connec...
The Michell HG10 Humidity Calibration System is a computer-controlled automatic calibration system for humidity sensors. The HG10 is capable of repeatable generation of temperature and relative humidity set points over the range 1 to 95% RH...
Guildline Instruments GL 1050 Series of Resistance Transfer Standards are designed as very high stability calibration laboratory transfer standards for customers looking to replace the old ESI SR1050 Series. PRODUCT FEATURES Very High Quali...
-327x226.jpg)
The 670SQ is our latest thermometer, to be specifically designed to give optimum performance up to the aluminium point. Its construction permits the four internal platinum lead wires to expand and contract in the same manner as those of sil...
-327x226.jpeg)
-327x226.jpeg)
Need advice on which model? Dry Block Selection Guide These models will calibrate temperature probes from -45°C to 250°C with unrivalled flexibility. As a traditional Dry Block, several thermometers can be quickly calibrated. Accessories ar...
A wall mounted oxygen analyzer in a NEMA enclosure, suitable for indoor or outdoor. This single channel oxygen monitor is supplied with a stainless steel O2 sensor housing for trace oxygen gas analysis in safe as well as hazardous areas whe...
The ADTS552F air data test set is a portable two-channel flightline pitot static tester with large pitot static volume capability for use on a wide range of aircraft, from light aircraft to wide body passenger and freight aircraft. It provi...
USB to RS 232 cable Connects the DPI620G to an RS 232 interface (not compatible with DPI620G-IS)...
Thermocouple Reference System The TRUrac is a 0°C or elevated temperature thermocouple reference system mounted in a 19” chassis. It has been developed for situations where ambient temperature can be up to 65°C. The reference temperature is...
The DPI104 is a microprocessor-controlled digital pressure gauge that combines precision and functionality in a compact, robust, and simple-to-use package. The DPI 04 matches advanced silicon sensor technology with several convenient design...
This dedicated apparatus has more than 35 years of proven use and is widely used by the worlds’ leading NMIs. In a recent International study cells from 21 of the world’s leading laboratories were inter-compared; the study used two Isotech ...
-327x226.jpg)
Whilst heat pipe furnaces offer the ideal environment to melt and freeze ITS-90 Fixed Points the temperature range is limited by fluid that flows inside the pipe. Three zone furnaces can offer wider operating ranges and still meet the requi...
The 3000RS is a modern precision resistance standard offering annual stabilities of better than 5ppm without the requirement for an oil bath, with temperature co-efficients as low as 0.1ppm/°C Using ultra-high precision, 4 wire hermetically...
A comprehensive and self-contained tool to make routine service and maintenance of the Easidew and Pura ranges of dew-point transmitters simple to carry out.
The Universal Communications Kit comprises:
Electronic communications platform
...
New Solution…to Calibrate Short Sensors at High Temperatures The Pegasus range offers extreme high temperature calibration in an easy to use portable package – ideal for the calibration of high temperature thermocouples. It has been designe...
VMF® – VenturiMasterFlow®
Flow measurement of air and gases
We develop and manufacture venturi tubes and nozzles as individual components or as complete VMF® systems. The VenturiMasterFlow® measuring system, or VMF® for short, is used...
9915-878 The protective transport case is designed for storage and safe transport of Additel ADT878 series temperature calibrators.
The case has an impact-resistant body made of corrosion-resistant PP Alloy material and provides protecti...
The HygroFlex1 series is the latest development in inexpensive HVAC transmitters for relative humidity and temperature. The devices are equipped
with the tried-and-tested Rotronic Hygromer® IN-1 sensor and boast unbeatable value for money....
