-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: TDL600 Dew-Point
Brief specifications
More details
Hydrocarbon dew point (HCDP) and moisture are key quality parameters to ensure the quality of pipeline transmission gas. With the combined Condumax II and OptiPEAK TDL600 analyzer system pipeline operators have the assurance of the most widely accepted automatic hydrocarbon dew point analyzer together with the latest development of spectroscopic moisture measurement techniques in a single, convenient analyzer system.
Both the OptiPEAK TDL600 and Condumax II are suitable for use with natural gas containing up to 20% hydrogen with no further modification required.
Visit the product pages for Condumax II and OptiPEAK TDL600 for full technical specifications.
Документация
-
Condumax II User Manual ENG (2.9MB)
-
Condumax II Data Sheet ENG (2.21MB)
-
Condumax II SS User Manual ENG (1.3MB)
-
Condumax II SS Руководство пользователя RUS (437.6KB)
-
Condumax II Руководство пользователя RUS (1.24MB)
-
OptiPEAK TDL600 Data Sheet ENG (2.06MB)
-
OptiPEAK TDL600 User Manual ENG (5.17MB)
-
OptiPEAK TDL600 Руководство пользователя RUS (1.56MB)
-
OptiPEAK TDL600 Техническое описание RUS (1.04MB)
Michell Condumax II and OptiPEAK TDL600 Dew-Point Analyzer
- Hydrocarbon Dew Point and Moisture Analyzer for Natural Gas
- Features
-
- Moisture:
- Measurement range: 1ppmV to 1000ppmV.
- Measurement technology: Tuneable Diode Laser Spectroscopy.
- Latest generation of TDLAS – moisture measurements are independent to changes in background gas composition.
- Class-leading accuracy ±1ppmV even with widely varying gas compositions.
- Hydrocarbon Dew-Point:
- Fully automatic analysis.
- Fundamental chilled mirror principle.
- HCDP measurement range: up to ∆ 55K measurement depression from main unit operating temperature.
- HCDP measurement technology: direct photo-detection of hydrocarbon condensate.
- General:
- Low maintenance.
- Easy to install with a small footprint.
Featured Products
-327x226.jpeg)
Download Icarus – Evaluation Download Icarus Data Sheet Download Software Guide Icarus is designed to calculate and display the relationship between resistance and temperature for Standard Platinum Resistance Thermometers between the triple...
-327x226.jpeg)
The Gemini R 550 Portable Blackbody Calibration Source allows for calibration of noncontact infrared thermometers over the temperature range 30°C to 550°C. It is suitable for use as a primary radiation source for infrared thermometers. Labo...
The PC52 series offers a comprehensive range of relative humidity probes for accurate, stable and repeatable measurements. Available with analogue output signals, the PC series can be installed in a wide variety of applications...
Other Features The Common Mode Rejecter (CMR) is an electronically compensated uncoupling unit for elimination of interaction of simultaneously tested electricity meters having interconnected current and voltage circuits (closed I-P links)....
-327x226.jpeg)
-327x226.jpeg)
Fast-Cal – the product range you designed During early 2004 20 experienced engineers from many parts of the world were asked to produce their ideal specification for industrial calibration. Their top ten requirements, in order of priority, ...
Suitable for trace oxygen measurements from 0.1 ppm through to purity applications at 100% oxygen, these rugged portable instruments share the same advanced sensor technology as the online process oxygen analyzers ensuring confidence in the...
GasPro – Mobile gas sampler
Representative cyclical gas sampling to determine gas quality in the gas network.
Analysing the gas quality in the gas network is essential to monitor technical specifications and ensure correct billing. Th...
-327x226.jpeg)
The Isotech Hydra range of calibration baths have proved very successful since their introduction in 2003. The Orion range has been introduced to fit alongside the Hydra models. The Orion calibration baths offer deeper calibration volumes t...
-327x226.jpeg)
-327x226.jpeg)
Need advice on which model? Dry Block Selection Guide The Gemini range of Dry Blocks have high capacity allowing a large number of probes to be calibrated together. They are also suitable to accept large diameter probes with the block volum...
A protective carrying case with shoulder strap and large pocket for accessories. Also accommodates the assembled system including the DPI620G and PM620...
-327x226.jpeg)
The TRU (Thermocouple Reference Unit) supplies a stable and accurate 0°C, or elevated reference temperature. It is a self-contained all solid-state unit using Peltier technology which provides maintenance free operation. The TRU features ra...
The DPS5000 I2C from Druck, part of the UNIK5000 family, offers integrated digital electronics to enhance the performance level of the UNIK5000 Pressure Sensing Platform to levels unmatched by traditional analog sensors. It features an I2C ...
Fluke P5540 Metric Adapter Set:
Includes adapters: M14x1.5, M20x1.5, 1/8" BSP, and 1/4" BSP female.
Designed for use with Fluke P5500 series hydraulic and pneumatic comparison test pumps, excluding P5514B.
Fluke P5541 BSP Adapter Set:
...
Software Designed to be used in conjunction with the 8000 Precision Multimeter Series and 8500 Low Thermal Scanner, ProGraph provides an instant solution for graphing stability, temperature and many other parameters. ProGraph is a 'plug and...
The 918 Pneumatic Pressure Test Pump is a hand operated pressure pump designed to generate pressure from 95% vacuum to 1,500 psi (100 bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution u...
Whenever a high pressure calibration pump is needed, we offer several portable, hydraulic test pump models designed to work seamlessly with a reference gauge and process connection. The QTHP reaches test pressures up to 5000 psi (35 MPa) wh...
MPG2-H is a compact, easy-to-use and economical system for manually generating and adjusting pressure from atmosphere to as high as 200 MPa (30 000 psi) in systems where precise pressure adjustment is required.
MPG2-H is very well suited f...
Model 426 is for Aluminium, Silver, Gold or Copper slim fixed point cells as well as for comparison calibration. Heat pipes provide the ideal conditions for the creation and maintenance of slim ITS-90 cells. The furnace core is a specially-...
Blanking plug
Allows the PV621G and 622G to be used as pressure generators independently of the DPI620G and PM620 by blanking the PV62XG pressure module port. Not required for the PV623G as the port is self-sealing...
Simple to use and rugged, the Easidew portable hygrometer is the ideal tool for a wide range of on-site maintenance spot checks and dry dew-point online measurements. The robust integral sample system and wide measurement range ceramic meta...
