AII GPR-1500 PPM Oxygen Analyzer/ Transmitter

-Accuracy: < 2% of FS range under constant conditions

Analysis: 0-10, 0-100, 0-1000 PPM, 0-1%, 0-25% (CAL) FS Auto-ranging or manual lock on a single range

Application: Oxygen analysis in inert, hydrocarbon, helium, hydrogen, mixed and acid (CO2) or atmospheres in glove boxes

Area Classification: General purpose or Certified for use in hazardous areas

Enclosure: Painted aluminum or NEMA Type 3R for rain in outdoor applications (UL) NEMA 4X (ATEX)

Flow: Not flow sensitive; 1-2 SCFH flow rate recommended

Pressure: Atmospheric; Flowing system: inlet - regulate to 5-30 psig, vent - atmospheric or return controlled atmosphere

Power: 18-24 VDC two wire loop; 12-28 VDC (cUL and ATEX Certified) 110-220 VAC (ATEX Certified)

Sample System: Glove box Sample Calibration Module (pictured right) or Sample flow meter; options available, see other side; Unique liquid drain sensor manifold, flow indicator

Sensor Model: GPR-12-333-M for non-acid (CO2) gas streams XLT-12-333-M for gases containing > 0.5% CO2

Operating Range: 5ºC to 45ºC (GPR sensor), -10ºC to 45ºC (XLT sensor); -10ºC to 45ºC (GPR sensor); -18ºC to 45ºC (XLT)

Код: GPR-1500

Brief specifications

More details

Купить в кредит

Add to Wish List

Compare this Product

A wall mounted oxygen analyzer in a NEMA enclosure, suitable for indoor or outdoor. This single channel oxygen monitor is supplied with a stainless steel O2 sensor housing for trace oxygen gas analysis in safe as well as hazardous areas where ATEX approval is needed. The low detection limit of 0.05ppm allows a minimum oxygen measurement range of 0 to 10 ppm O2. Ideal for clean gas applications and when used with the XLT oxygen sensor type it allows measurement in pure carbon dioxide. The Analytical Industries long-life oxygen sensors are maintenance-free sealed electrochemical cells that don’t need top up of electrolyte and can be exchanged in few minutes.

ВимірюванняГенерація (Імітація)

Открыть спецификацию

Закрыть спецификацию

Документация

AII GPR-1500 PPM Oxygen Analyzer/ Transmitter

Name: AII GPR-1500 PPM Oxygen Analyzer/ Transmitter
Brand: Analytical Industries Inc
SKU: GPR-1500
Availability: OutOfStock

-Accuracy: < 2% of FS range under constant conditions

Analysis: 0-10, 0-100, 0-1000 PPM, 0-1%, 0-25% (CAL) FS Auto-ranging or manual lock on a single range

Application: Oxygen analysis in inert, hydrocarbon, helium, hydrogen, mixed and acid (CO2) or atmospheres in glove boxes

Area Classification: General purpose or Certified for use in hazardous areas

Enclosure: Painted aluminum or NEMA Type 3R for rain in outdoor applications (UL) NEMA 4X (ATEX)

Flow: Not flow sensitive; 1-2 SCFH flow rate recommended

Pressure: Atmospheric; Flowing system: inlet - regulate to 5-30 psig, vent - atmospheric or return controlled atmosphere

Power: 18-24 VDC two wire loop; 12-28 VDC (cUL and ATEX Certified) 110-220 VAC (ATEX Certified)

Sample System: Glove box Sample Calibration Module (pictured right) or Sample flow meter; options available, see other side; Unique liquid drain sensor manifold, flow indicator

Sensor Model: GPR-12-333-M for non-acid (CO2) gas streams XLT-12-333-M for gases containing > 0.5% CO2

Operating Range: 5ºC to 45ºC (GPR sensor), -10ºC to 45ºC (XLT sensor); -10ºC to 45ºC (GPR sensor); -18ºC to 45ºC (XLT)

Foto

Options / Accessories

Description

Featured Products

2700G Reference Pressure Gauge

The 2700G Reference Pressure Gauges provide best-in-class measurement performance in a rugged, easy-to-use, economical package. Improved measurement accuracy allows it to be used for a wide variety of applications. It is ideal for calibrati...

Код: 2700G

3050A precision multiproduct calibrator

The 3000A Series multiproduct calibrators have been designed to help you and your business, allowing a wide range of calibration work to be performed quickly, accurately and economically. Modern calibration is a competitive market, and cost...

Код: 3050A

ITS-90 Optimal Fixed Point Cells

Isotech Ultra Pure-Metal Freezing Point Cells are designed specifically to realize the liquid-solid equilibrium temperatures of certain high-purity metal elements, for calibration of thermometers at the ITS-90 Fixed Points. When you purchas...

Код: ITS-90

Stirred Ice Bath Model 813

The most used temperature for calibration is 0°C. The normal way of creating 0°C is via a mixture of ice and water in a Dewar Flask. However, this can give errors of up to 4°C because water is densest at 4°C and so as the ice melts the temp...

Код: 813

Additel 875-1210 Thermocouple Calibration Furnaces

We understand the many challenges associated with thermocouple calibration work. That is precisely why we decided to introduce the ADT875-1210 and ADT878-1210 Thermocouple Calibration Furnaces. With an unmatched stability, uniformity and an...

Код: ADT878-1210

P5523 Liquid-to-Gas Media Separator

For high pressure pneumatic calibrations this unit interfaces with hydraulic deadweight testers providing a rateless liquid-to gas separation. Driven by a pneumatic pressure source (nitrogen bottle) and controlled by needle valves, high pre...

Код: P5523

PV210 Low-Pressure Pneumatic Vacuum Pump

The PV210 is a lightweight, yet rugged and durable, low pressure and vacuum hand pump offering exceptional fine control. Thermally insulated to eliminate hand held temperature effects and supplied with a built-in pressure relief valve to pr...

Код: PV210

Orion Model 796M

The Isotech Hydra range of calibration baths have proved very successful since their introduction in 2003. The Orion range has been introduced to fit alongside the Hydra models. The Orion calibration baths offer deeper calibration volumes t...

Код: 796M

P3000 Pneumatic Deadweight Testers

The P3000 Series is the culmination of over 50 years of experience in the production and design of high performance pressure standards. With features designed to improve accuracy and performance, increase reliability and simplify operation ...

Код: P3000

AII GPR-2600 Oxygen Analyzer

Our range of oxygen analyzers are designed to monitor gas produced or used in industrial processes where trace oxygen from low parts per million to pure O2 must be precisely measured. Utilizing AII’s high performance galvanic oxygen sensors...

Код: GPR-2600

Interchangeable Humidity and Temperature Sensor - Michell HygroSmart I7000XP Series

The HygroSmart I7000XP sensor is designed to accurately and reliably measure relative humidity and temperature in a wide spectrum of industrial and heavy industrial applications. The sensor uses the latest HygroSmart 3 technology, providing...

Код: I7000XP

TTI-22

Quite simply the Isotech TTI-22 High Accuracy Thermometer sets new standards in the price to performance ratio for industrial and secondary resistance thermometry. If you need high accuracy at an affordable price you have to look at the TTI...

Код: TTI-22

Intrinsically safe dew-point transmitter - Michell Easidew PRO I.S.

The Easidew PRO I.S. intrinsically safe dew-point transmitter measures moisture in demanding process and refinery applications in either gases or non-polar liquids. It offers a wide measurement range of –110 to +20°Cdp, is easily integra...

Код: Easidew PRO I.S.

8370A High-Pressure Calibrator

The 8370A measures and controls pressures from atmosphere to 107 MPa. It can be configured with ranges as low as 700 kPa. Fluke Calibration’s unique control technology enables you to use these calibrators at low or high pressures, all in t...

Код: 8370A

New Reference Standard

The Reference Standard RS 3330 is designed for the highest possible precision meter for quantities related to electrical power and energy measurements. The Reference Standard is designed to meet all requirements put on a reference standard ...

Код: New Reference Standard

3130 Portable Pressure Calibrator

The 3130 Portable Pneumatic Pressure Calibrator is ideal for calibrating pressure transmitters, transducers, gauges and similar devices. The 3130 contains everything you need to generate, control and measure pressure, as well as read the ou...

Код: 3130

2080 17TH EDITION ELECTRICAL CHECK BOX electrical test equipment

Designed with low cost, portability and ease of use in mind, the 2080 provides on or off site verification of RCD testers, Loop testers, Continuity and Insulation testers and multifunction testers. The 2080 is simple to use and provides the...

Код: 2080

6622A Series

Guildline Instruments 6622A Series has unique technology and provides the best in measurement uncertainties for Direct Current Comparator (DCC) Resistance Bridges. PRODUCT FEATURES Widest Available Range from 1 mΩ ~1 GΩ Best Accuracy: ± 0.0...

Код: 6622A

Humidity Temperature Probes - Rotronic HC2A-SH/S3H

The HC2A series are digital humidity-temperature probes based on the AirChip3000 technology. These probes feature a UART serial interface and two 0…1 V linear analog output signals. The HC2A probes are designed for use with the HygroClip2...

Код: HC2A-SH/S3H

AII GPR-1200 Portable PPM Oxygen Analyzer

Analytical Industries’ high-accuracy portable oxygen analyzers are for applications which must be controlled at several defined measurement points. The GPR-3500 model has a compact, rugged enclosure and includes stainless steel wetted parts...

Код: GPR-1200

AII GPR-1500 PPM Oxygen Analyzer/ Transmitter

Документация

AII GPR-1500 PPM Oxygen Analyzer/ Transmitter

Newsletter Subscribe