-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: PCMini52
Brief specifications
More details
The micro processor control and multi-point calibration gives the PCMini52 RH probe excellent performance in terms of accuracy and linearity. The mini probe has two linear analog outputs for temperature and relative humidity.
Rotronic PCMini52 - Digital RH Mini Probe with Temperature output
-Accuracy: ±2 %rh (10...90 %rh), ±0.2 K @ 23 °C
Application range: 0…100 %rh, -20…80 °C
Stability: ±1 %rh/year
Output signal: Modbus RTU 0 to 1, 0 to 5, 0 to 10 V
Power supply: 14…35 VDC (0…5 V/0…10 V output) 6…35 VDC (0…1 V output)
Featured Products
The DPI610E combines effortless pressure measurement and generation, signal measurement and loop power with significantly improved pump capabilities and a powerful touch and button user interface.
With a robust design, the unit has been ...
The 3000HR provides a traceable source for high voltage resistance, consisting of a buildup box of 1 GOhm and 10 Gohm resistors, allowing a buildup to 100 Gohm. High value resistance standards are required by many laboratories for calibrati...
Transmilles ProCal software provides a cost effective and easy to use solution for automating calibration, from a single workstation through to a network multi discipline network. ProCal comes pre loaded with drivers for many common instrum...
-327x226.jpeg)
The Oberon R uses a Sodium heat Pipe to ensure an exceptionally low temperature gradient along the furnace core. It is ideal for the realization of Aluminium, Silver or Copper ITS-90 Fixed Points. It may be used as a blackbody source over t...
Manual pneumatic pumps Ralston DCAP are reliable tools for precise pressure calibration, designed to perform in a wide range of environments. With their straightforward and intuitive design, these pumps are an ideal choice for both laborato...
GUILDLINE INSTRUMENTS GL 1010 SERIES of Resistance Transfer Standards are very stable and low uncertainty calibration laboratory standards for customers looking to replace the old ESI 1010 series. PRODUCT FEATURES Transfer Accuracy better t...
ProEdit is included in the ProCal suite of programs, and can be run independently of ProCal. This allows procedures to be edited on computers that are currently not in use to avoid interfering with laboratory workflow and without requiring ...
The RPS/DPS 8000 is the first product to incorporate the exciting new TERPS technology. TERPS is a resonant silicon pressure sensor technology platform that provides an order of magnitude greater accuracy and stability than current pressure...
Thermocouple Reference System The TRUrac is a 0°C or elevated temperature thermocouple reference system mounted in a 19” chassis. It has been developed for situations where ambient temperature can be up to 65°C. The reference temperature is...
GUILDLINE INSTRUMENTS 9334A SERIES of Resistance Standards are designed as very stable laboratory standards for high accuracy resistance calibration in air, without the need for a temperature controlled bath. PRODUCT FEATURES 12 Month Stabi...
GB-75 and GB-152 are gas boosters with control kits intended to be used to provide a very high pressure gas supply to systems using a Fluke Calibration GPC1 High Pressure Gas Controller and other high gas pressure test and calibration syste...
Complete set of pressure modules for PACE 5000 and 6000 series controllers They have a wide measuring range up to 210 bar of pneumatic pressure. There is a wide range of measurement accuracy to choose from...
Critical / Sonic nozzles
Flow measurement elements with highest accuracy
EP Ehrler Prüftechnik manufactures sonic nozzles in the flow range from 0.005 up to 2000 m³/h. In addition to the standard range, EP Ehrler Prüftechnik offers cu...
Choice of male 1/4NPT, 1/4BSP, or M20x1.5 fitting type to the following connections, each as male or female:
- 1/8BSP
- 1/4BSP
- 1/2BSP
- 3/8BSP
- M10x1.0
- M14x1.5
- M20x1.5
- 1/8NPT
- 1/4NPT
- 1/2NPT
- 3/8NPT
(Designed for a...
-327x226.jpeg)
The microsKanner can be used with any member of the microK family to add further channels, up to a maximum of 90 expansion channels. Easy to Use: The use of plug-and-play technology means that the extra channels appear automatically on your...
The International Recognized Calibration Standard for Salinometers The International Association for Physical Sciences of the Ocean (IAPSO) Standard Seawater manufactured by Ocean Scientific International (OSIL) is available in North Americ...
Isotech Nitrogen Boiling Point Apparatus is designed specifically to realise and maintain the liquid/vapour equilibrium (boiling point) of nitrogen or argon, for the calibration of thermometers on the International Temperature Scale of 1990...
PPCH™, is a pressure generator/controller/calibrator for liquid pressure operation from 1 to 200 MPa. As with the rest of the Fluke Calibration PPC family of pressure controllers, the emphasis is on high end performance, minimizing measurem...
The DPI 610 Aeronautical version is a low cost yet flexible portable calibrator for precision leak testing of aircraft pitot static systems. Configured as a single channel unit for testing either altitude or airspeed parameters, it is fully...
-327x226.jpg)
-327x226.jpg)
The 925 Hydraulic Pressure Test Pump is a hand operated pressure pump designed to generate pressure from 85% vacuum to 6,000psi (400bar). With the patented screw press technology, the high pressure can be easily generated, as well as increa...
