-350x280.jpg)
-350x280.jpg)
-350x280.jpeg)
Код: PSD2,4
Brief specifications
More details
Pressure Swing dryers provide a source of very dry compressed air for use as a zero gas in humidity calibration systems, or for general laboratory applications.
The Michell PSD Series Pressure Swing Dryers use two columns filled with 4Å molecular sieve desiccant, which are used alternately on a two-minute switching cycle. The PSD dryers are designed to operate continuously, using a small proportion of the dried air, to regenerate the offline column - generally giving desiccant life in excess of five years. This type of heatless regeneration also uses significantly less energy than a 'heated' type of dryer.
Dryers for Humidity Calibration Systems - PSD2 and PSD4
- Pressure Swing Drying Principle for Continuous Operation
- Features
-
- Excellent long-term stability
- Maintenance free except for a desiccant change once every 5 years
- Completely self-contained
- Low power consumption
Featured Products
-327x226.jpeg)
Primary Standard cells fit into the Medusa and Oberon, covering from Indium to Copper Points. These cylindrical cells are 42mm diameter and have a cavity 9mm diameter x 87mm deep. The Medium Temperature “Hockey Puck” cells are 64mm diameter...
The ITS-90 specifies the SPRT to the freezing point of silver, 961.78°C. Thermocouples can be used beyond this temperature but it is difficult to see small changes in temperature. For a Type R thermocouple the voltage sensitivity at the cop...
-327x226.jpg)
Additel's ADT686 Advanced Digital Pressure Gauges will redefine the way you want to measure pressure! With wireless remote connectivity, microprocessor technology, state of-the-art silicon pressure sensors and optional onboard storage capac...
The Working Standard WS 2330 is a three-phase precision reference meter for electrical power and energy measurement, dedicated to on-site meter testing. The device provides also function of local data exchange with smart meters (data readou...
-327x226.jpg)
PM620 now incorporates our unique range of TERPS resonant silicon pressure sensor technology, the PM620T and the PM620TS intrinsically safe version. Providing up to four times greater stability and higher accuracy than current pressure meas...
The NEW 8158 Advanced Digitising Multimeter from Transmille has been designed as a modern replacement for aging multimeters without compromise. Capable of measurements at a rate of over 100,000 Samples per second, the 8158 8.5 Digit Multime...
If you are serious about portable temperature calibration tools, then you know a good dry well calibrator is more than just a stable heat source. The Additel 875 Series Dry Well Calibrators combine excellent performance in stability, radial...
A high pressure hydraulic hose rated to 1,000 bar (15,000 psi) and terminated with quick fit connectors compatible with the test point adaptors supplied with the PV62XG, MC620G and the adaptor sets. The hose is self sealing to avoid leakage...
The Additel 100-FLT-1K is a pneumatic filter and liquid trap covering from -15 to 1,000 psi (-1.0 to 70 bar). This filter is ideal for your pneumatic measurement or calibration applications and contains an easy to use drain valve for removi...
Designed with low cost, portability and ease of use in mind, the 2080 provides on or off site verification of RCD testers, Loop testers, Continuity and Insulation testers and multifunction testers. The 2080 is simple to use and provides the...
IDOS to USB converter Allows connection of an IDOS universal pressure module to the DPI620G. P/N IO620-USB-PC is also required to connect the converter to the DPI620G USB port. (not compatible with DPI620G-IS)...
-327x226.jpeg)
The Hyperion R Portable Blackbody Calibration Source allows for calibration of non-contact infrared thermometers over the temperature range -20°C to 125°C. One application is the calibration of non-contact medical thermometers. With the sud...
DPI 104 Gauge adaptor
Allows a DPI 104 digital pressure gauge to be connected to the PV62XG pressure module port in place of DPI620G and PM620 to provide a simple low cost pressure calibrator...
Use I-Cal Easy to automate sensor calibration, enter up to 20 calibration points and let the software set the bath, wait for stability and log the data automatically. Choose the stability criteria and how many points to record at each calib...
IDOS (Intelligent Digital Output Sensor) are smart, Universal Pressure Modules that are interchangeable between any IDOS compatible Druck instruments. They are truly “Plug and Play” modules in that they do not require calibration or set-up ...
Probes are suitable for use with all Isotech thermocouple reference units or may be used with any other equipment including ice flasks and ice point reference units. They can be supplied to suit a single thermocouple, or up to ten double ju...
-327x226.jpeg)
-327x226.jpeg)
The Isotech Model 915 Liquid Bath is suitable has a wide temperature range, using silicon oils and other suitable liquids. All components in contact with the liquid are of stainless steel, and are insulated with materials which are complete...
GUILDLINE INSTRUMENTS provides two series of the best performing, most compact, wide-band AC current shunts that are commercially available PRODUCT FEATURES High Current Values to 100 A AC/DC Difference Essentially Zero at Power Frequencies...
This model is a lower cost alternative to the ITL M 18205. This model is a simple apparatus open to the atmosphere comprising a stainless steel dewar flask filled with liquid Nitrogen, an insulating layer which houses a metallic equalising ...
-327x226.jpeg)
-327x226.jpeg)
Fast-Cal – the product range you designed During early 2004 20 experienced engineers from many parts of the world were asked to produce their ideal specification for industrial calibration. Their top ten requirements, in order of priority, ...
